VogSe85 49 #1 Posted March 7, 2016 I purchased a very nice machine from SteveBo as my equipment needs are changing and so is my stable. I picked up a clean RJ58 and had to make it my own. I changed the Cliton engine base gasket, axle seals, found another set of rear wheels, got some tires and fabricated dual wheel adapters. I also fabricated a slot hitch adapter for towing misc and here's where I'm at... 12 Share this post Link to post Share on other sites
AMC RULES 37,125 #2 Posted March 7, 2016 (edited) Besides an FEL... there's nothing cooler than dual ags on an RJ. Edited March 7, 2016 by AMC RULES 2 Share this post Link to post Share on other sites
VogSe85 49 #3 Posted March 7, 2016 (edited) Just ordered Tri-Rib fronts, I'm also going to sell my rotary mower and get a sickle mower for it, maybe a plow. Killing me, I'm having a tough time parting with that GT-14 w/FEL in the background. I know I want more than what it's worth, but not sure I'll sell it for that. Edited March 7, 2016 by VogSe85 Share this post Link to post Share on other sites
can whlvr 993 #4 Posted March 7, 2016 nice tractor 1 Share this post Link to post Share on other sites
Mr. 856 170 #5 Posted March 7, 2016 11 hours ago, AMC RULES said: Besides an FEL... there's nothing cooler than dual ags on an RJ. I've considered putting one on my 856. Are you serious that an RJ can handle an FEL? Share this post Link to post Share on other sites
wallfish 16,980 #6 Posted March 7, 2016 Best to run those outside tires with 0 air pressure in them and maybe even higher than normal pressure for the inside tires. Those axle tubes will easily bend with the extra leverage from running duals on uneven ground. 3 Share this post Link to post Share on other sites
AMC RULES 37,125 #7 Posted March 7, 2016 8 hours ago, Mr. 856 said: I've considered putting one on my 856. Are you serious that an RJ can handle an FEL? I stand corrected... my memory of the one round hood FEL unit I've seen, isn't on an RJ. 6 Share this post Link to post Share on other sites
VogSe85 49 #8 Posted March 7, 2016 Still very cool machine!!! I will take your advice Wallfish and lower the outside tirepressures. Share this post Link to post Share on other sites
stevebo-(Moderator) 8,330 #9 Posted March 8, 2016 Looks great. Glad to see that tractor being used. Share this post Link to post Share on other sites
AMC RULES 37,125 #10 Posted March 8, 2016 Found another image here. 5 Share this post Link to post Share on other sites
AlwaysLookin80 1,308 #11 Posted March 8, 2016 On March 7, 2016 at 6:25 PM, VogSe85 said: I purchased a very nice machine from SteveBo as my equipment needs are changing and so is my stable. I picked up a clean RJ58 and had to make it my own. I changed the Cliton engine base gasket, axle seals, found another set of rear wheels, got some tires and fabricated dual wheel adapters. I also fabricated a slot hitch adapter for towing misc and here's where I'm at... This tractor is awesome. I want it now! 1 Share this post Link to post Share on other sites
WHX?? 48,749 #12 Posted March 9, 2016 On 3/8/2016 at 7:24 PM, AMC RULES said: Found another image here. Guys gotta wonder what is on the other end of that purple rachet strap??? On 3/7/2016 at 6:29 PM, VogSe85 said: I'm having a tough time parting with that GT-14 w/FEL in the background. Then don't.... even if the MIssus gets pregnant! But if you do need to part with it we are here for it! Share this post Link to post Share on other sites
VogSe85 49 #13 Posted March 9, 2016 Check out the Classifieds... I listed the GT14 for sale. I'm hoping to expand my RJ collection instead and the word BABY has been getting thrown around a lot lately and I don't think she means it in the context as I...... Look at my new baby, my RJ58! 1 Share this post Link to post Share on other sites
VogSe85 49 #14 Posted March 10, 2016 (edited) Put some ribbed tires on the front, decided to keep my RMR-32 mower so I put the belt guard back on so my pants don't get snagged on that pulley. Also an excuse to show off my GT-14 FEL and Bobcat 610 I restored! Edited March 10, 2016 by VogSe85 5 Share this post Link to post Share on other sites
stevebo-(Moderator) 8,330 #15 Posted March 11, 2016 Keeps getting better. That bobcat looks nice too Share this post Link to post Share on other sites
AMC RULES 37,125 #16 Posted March 11, 2016 Does look great... what brand are the tri-ribs? Share this post Link to post Share on other sites
VogSe85 49 #17 Posted March 11, 2016 They are Deestones D401 4.00-8 Thanks Steve! I'll sneak a quick one in... 1972 Bobcat 610 4cyl 30hp gas Wisconsin engine w/aux thumb 1 Share this post Link to post Share on other sites
VogSe85 49 #18 Posted March 11, 2016 Since I'm on a roll of showing off my old equipment I've restored, 1 more thing before I get back to the RJ... Restored 1950 Onan Generator, back feed it through one of my welding plugs in my shop and can run the garage and house with this bad boy! 2 Share this post Link to post Share on other sites
Wheelin'theSky 57 #19 Posted March 11, 2016 Probably don't have to worry about getting stuck with that rear wheel setup. Share this post Link to post Share on other sites
AMC RULES 37,125 #20 Posted March 11, 2016 To complete the look, now all you need is an OE shower cap muffler. 2 Share this post Link to post Share on other sites
stevebo-(Moderator) 8,330 #21 Posted March 11, 2016 I would like to get some more pics and information on that Onan starter set up. That is the same starter set up that I have on my electric start RJ35 which is missing the actual starter motor. Mine is chain driven too. 1 Share this post Link to post Share on other sites
VogSe85 49 #22 Posted March 11, 2016 That's awesome Steve! Remind me this evening and I'll take a bunch of pictures of it and see what numbers I can pull off it if any. 1 Share this post Link to post Share on other sites
VogSe85 49 #23 Posted March 12, 2016 Steve, no numbers but... 1 Share this post Link to post Share on other sites
stevebo-(Moderator) 8,330 #24 Posted March 12, 2016 What are the measurements on that one? Share this post Link to post Share on other sites
VogSe85 49 #25 Posted March 12, 2016 The body is 7"L 4.25"W shaft is 2 1/2"L 5/8"D sprocket is 8t Share this post Link to post Share on other sites
