ztnoo 2,298 #26 Posted February 22, 2016 Yeah, I had that sad experience too with the K321 originally in my GT 14. The rod decide to kick the bucket and go to Kohler Heaven, punching a large hole in the block in the midst of its detonation and demise. Replaced the mill with a brand new K341.....that was when you could still buy a new cast iron K series. Unfortunately, the day of new inventory K acquisitions is gone, as far as I know. Share this post Link to post Share on other sites
DennisThornton 4,769 #27 Posted February 22, 2016 7 hours ago, stevasaurus said: You know what they say..."If you can jump it, you can weld it." Ummm, everything but the crack of dawn and a broken heart? Share this post Link to post Share on other sites
Ed Kennell 38,021 #28 Posted February 22, 2016 Help, I have an ant under my screen. Share this post Link to post Share on other sites
ztnoo 2,298 #29 Posted February 22, 2016 Eh mate, its a flea from me roo in the pic above. Doc say nuttin' to be done to exterminate 'em. Share this post Link to post Share on other sites
DennisThornton 4,769 #30 Posted February 22, 2016 12 minutes ago, ekennell said: Help, I have an ant under my screen. Don't kill it! I now have a dead spider under mine! Thought I was in the Twilight Zone for a while, or had a virus or something. Couldn't wipe it off! Finally push too hard... A teensy weensy spider between the outside and the LEDs! Now I get to disassemble my monitor! Share this post Link to post Share on other sites
Ed Kennell 38,021 #31 Posted February 22, 2016 4 minutes ago, ztnoo said: . Doc say nuttin' to be done to exterminate 'em. The roo or the flea ? 1 Share this post Link to post Share on other sites
ztnoo 2,298 #32 Posted February 22, 2016 either one.......... Share this post Link to post Share on other sites
squonk 41,020 #34 Posted February 23, 2016 (edited) I can't believe no one mentioned trying bailing wire yet! Edited February 23, 2016 by squonk 1 Share this post Link to post Share on other sites
DennisThornton 4,769 #35 Posted February 23, 2016 2 hours ago, squonk said: I can't believe no one mentioned trying bailing wire yet! No challenge, nothing new or innovative there! We all know that will work! 2 Share this post Link to post Share on other sites
TDF5G 2,069 #36 Posted February 23, 2016 On 2/22/2016 at 6:08 PM, KC9KAS said: No abnormal sounds at all. The rod broke when it was at TDC and the crank continued to spin...Thought that was odd the spinning continuing! I've got a 12 HP that did the same thing. I've not got it torn down yet, but getting close. I'll bet the rod looks like yours! IMG_2780.MOV Share this post Link to post Share on other sites
Ed Kennell 38,021 #37 Posted February 23, 2016 Yep, when the piston doesn't move. there is a good possibility the connecting rod is no longer connected. 1 Share this post Link to post Share on other sites
Kegler 68 #38 Posted February 23, 2016 Have had good results from BONDIC on plastic, haven't tried it on metal yet Knocked my drill/driver off the top of my step ladder and the battery went one direction, in a couple of pieces, and the drill unit went in another, with the handle in 3 pieces. glued it all back together and so far it seems to be holding. Didn't clamp, or squeese the parts too tight to allow some glut spaceSpent extra time setting it. Share this post Link to post Share on other sites
WNYPCRepair 1,914 #39 Posted February 23, 2016 I think you could drill a couple of holes in it, tap them and bolt that right back together. Well, maybe a few holes. Share this post Link to post Share on other sites
