can whlvr 993 #1 Posted February 15, 2016 so I got some time this weekend(not a lot due to honey do list)and I finally got to fab up a few recivers for my c160,s once you have a 2 inch receiver the skys the limit to what you can put back there,anything that can be welded or bolted to a 2 inch piece of square tube,i know we have a member that makes these and I can tell you his price is very fair,as theres a lot of work to fab these up,i made mine with the rear attachmatic for plows and tillers,ill paint it in the spring 6 Share this post Link to post Share on other sites
857 horse 2,581 #2 Posted February 16, 2016 Don,,,you are right......i have the one from Don R. ..............it fit perfect,,,,when a neighbor sees it they ask were the camper or boat is sitting,,,they are amazed at that they are looking at,,,with little imagination and your thoughts running wild....let the welding begin !!!!!!!!!!!!!! that dont include what you already stick in a hitch !!!! 3 Share this post Link to post Share on other sites
can whlvr 993 #3 Posted February 16, 2016 that's a real nice job on that hitch,mine arnt as pretty,but will do for a work tractor 1 Share this post Link to post Share on other sites
857 horse 2,581 #4 Posted February 17, 2016 1 hour ago, can whlvr said: that's a real nice job on that hitch,mine arnt as pretty,but will do for a work tractor Don....they look the same !!!!!! you did a great job....If i was a welder (( even fair)) i would have took a shot......But all i can offer is a shot in the dark..... 1 Share this post Link to post Share on other sites
smoreau 658 #5 Posted February 18, 2016 On 2/16/2016 at 7:50 AM, 857 horse said: Don,,,you are right......i have the one from Don R. ..............it fit perfect,,,,when a neighbor sees it they ask were the camper or boat is sitting,,,they are amazed at that they are looking at,,,with little imagination and your thoughts running wild....let the welding begin !!!!!!!!!!!!!! that dont incluat you already stick in a hitch !!!! The name is Tom Ruprecht or n1defan. He and I started building these hitches 4+ years ago and there's still demand for them. Would have to say we have sold well over 200 of them and orders keep coming in. Tom took it over by. Himself a few years ago as I took a different job and spar time is hard to find. Biggest attachment I use on this hitch is 5ft York rake from a category one 3 point hitch. I use a wench to lift it and need to add 200lbs to the front of the tractor for good steering. Works great you canfind a link to reach Tom in the vendor section. 6 Share this post Link to post Share on other sites
can whlvr 993 #6 Posted February 18, 2016 I knew you were making these hitches scott,i just didn't know if you still were or not and I didn't want to say your name without permission or knowledge if you were still manufacturing these quality hitches,i must admit I fabbed my first one several years ago with an old reese hitch I had from a lease truck that went back,ive made 4 since then but I borrowed your idea of using the factory hitch bar for extra support,very good idea,and keep on producing those fine hitches 3 Share this post Link to post Share on other sites
stevasaurus 22,837 #7 Posted February 18, 2016 I am the proud owner of one of Scott's hitches. Here is a thought for an attachment that I have been tossing around for use at some of the shows I go to. 9 Share this post Link to post Share on other sites
WHX?? 49,032 #8 Posted February 18, 2016 Is that a grill on there or cooler...or both? 3 Share this post Link to post Share on other sites
russellmc301 600 #9 Posted February 18, 2016 have the cooler in the front to even out the weight and you would be set at the show you can drive around cooking some hamburgers. 2 Share this post Link to post Share on other sites
Pullstart 63,024 #10 Posted February 19, 2016 Who's gonna start marketing the tach-a-matic cooler brackets? 1 Share this post Link to post Share on other sites
857 horse 2,581 #11 Posted February 19, 2016 9 hours ago, stevasaurus said: I am the proud owner of one of Scott's hitches. Here is a thought for an attachment that I have been tossing around for use at some of the shows I go to. Scott,,,,,no harm ment or intended on a axe job on Toms name,,,and your hi end manufacturing...process....i have 2 of them...When i go to the BIG SHOW,,,everyone asks,,,,,and i do pronounce Toms name when asked......as far as THIS grill attachment,,,the artist rendition made me think is was a PIE safe... please forward Steve your advise.....thank-you again.....see you at the show........Howard in Va .. 1 Share this post Link to post Share on other sites
stevasaurus 22,837 #12 Posted February 19, 2016 Scott, I am thinking you could back up this horse up to the picnic table and do steaks and potatoes and onions in foil...where ever there is shade. Check out this table and see what you think. Saturday AUG 4th Show Pic's Notice the wheels on the table. 2 Share this post Link to post Share on other sites
Pullstart 63,024 #13 Posted February 20, 2016 22 hours ago, stevasaurus said: Notice the wheels on the table. The power picnic table is pretty sweet, but who's two up ride is that parked next to it? Is there a build thread for it? Share this post Link to post Share on other sites
smoreau 658 #14 Posted February 20, 2016 23 hours ago, stevasaurus said: Scott, I am thinking you could back up this horse up to the picnic table and do steaks and potatoes and onions in foil...where ever there is shade. Check out this table and see what you think. Saturday AUG 4th Show Pic's Notice the wheels on the table. Steve I think this would be great idea!! Love the grill idea, Tom has always thought on building a trailer for themeals on wheels with a grill and cooler. Just never happened 1 Share this post Link to post Share on other sites
AMC RULES 37,134 #15 Posted February 20, 2016 (edited) Steve...just planting a roc-n-rye seed here. Remember, if you build it...they will come. Edited February 20, 2016 by AMC RULES 3 Share this post Link to post Share on other sites
