Jump to content
98layinframe

Plow brackets and pieces needed.

By 98layinframe, in Implements and Attachments

Recommended Posts

98layinframe    22

98layinframe
Posted

 Wondering if anyone has some nice pictures of the plow brackets that would fit my 414?  Picked up an old plow for cheap at an auction , and ofcourse the axle bracket isn't there.  I'm hoping to make sone brackets.  Any close up pics with a ruler would help!  Thanks

Share this post

Link to post
Share on other sites
 

varosd    1,185

varosd
Posted

here is some pictures.  I seem to remember a old post of very detailed measurements.  others will chime in

there was 2 styles of bracket.  you need this style

plowbracket002.jpg

plowbracket003.jpg

Share this post

Link to post
Share on other sites
 

98layinframe    22

98layinframe
Posted

yup thats it!    I'd love to find that detailed thread, these look stupid simple to make.. couple pieces of 3" angle, flat bar stock, and I have access to multiple cnc lazer and plasma cutters to make the locking handles.  Just need a few good pictures with rulers to gauge the sizing and location of the holes and general layout.

Share this post

Link to post
Share on other sites
 

Tankman    3,518

Tankman
Posted

Long ago made a plow mount using angle iron and flat bar.

 

No leavers. just one clearance hole in each angle for the plow frame rod (1"?) and two bolt clearance holes of course.

Angle with flat bar bolted in place. Lifted (floor jack) the plow frame and insert one side (frame rod).

Slide the 2nd angle onto the plow frame mounting rod, tighten the bolts. Was easy enough.

 

No locking leavers. Worked great.

Share this post

Link to post
Share on other sites
 

Tankman    3,518

Tankman
Posted
23 hours ago, 98layinframe said:

yup thats it!    I'd love to find that detailed thread, these look stupid simple to make.. couple pieces of 3" angle, flat bar stock, and I have access to multiple cnc lazer and plasma cutters to make the locking handles.  Just need a few good pictures with rulers to gauge the sizing and location of the holes and general layout.

If I get some time I'll draw the mount for you (I use AutoCAD).

I have a complete 48" plow (frame, mount, angle leaver) not in use.

 

With the CNC equipment you have, piece ok cake.

  • Like 1

Share this post

Link to post
Share on other sites
 
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Go To Topic Listing

  • Similar Content

    • cbj75
      D200 Package for Sale
      By cbj75
      I have a 1975 D200 Wheel Horse with front mount dozer blade, package includes Wheel Horse Dump Trailer, 48" belly mower side discharge, Wheel Horse front and rear wheel weights, turning brakes, rear PTO and 3-point to 2" receiver attachment, and Brinley twin disc harrow. Rear luggage/rack carrier, All refurbished, sandblasted and painted Ford red in 2016. Lots of extra Wheel Horse parts included.
       
      Package price $3000.00.
       
      Bryce Johnson
      102 Anglers PT
      Mc Cormick SC 29835
      913-638-6788

      IMG_1962.HEIC IMG_1965.HEIC IMG_0279.HEIC


       
    • Donavon
      Wheel horse 1054
      By Donavon
      Need ideas to convert my 1054 A Frame plow into a snow blower
      Any idea's?
    • captjack
      Wheel Horse Snow Plow
      By captjack
      Ahoy!  captjack.  I went to Manhattan, Kansas and purchased three Wheel Horses.  Along with the machines were a snow plow and the required items to attach it to a WH.  I also have a set of concrete wheel weights.  The plow appears to be very slightly used. As I am a John Deere AMT collector, I have no idea what a fair price would be.  Could someone let me know and, also, I can deliver them.
      Thanks and stay safe.
      captjack




    • WVHillbilly520H
      My other Red tractor
      By WVHillbilly520H
      @WHX24, @PeacemakerJack, @ebinmaine, @JCM, @shallowwatersailor, @pullstart, @Horse Newbie, @elcamino/wheelhorse, @Ed Kennell, and the rest of RS ....
       
      As I have mentioned before I would be getting snow removal tools for my Mahindra eMax 22, the whole package plow, blower and soft cab, I had purchased a Kubota set-up a couple years back with the intentions of modifying it to fit/work with it but after careful consideration decided just to sell it to help pay for the correct set-up built for Mahindra (by Berco in Canada), I ordered it the end of October and its showed at the dealer in PA right before Christmas and I just picked it up Friday, and today got the sub-frame (which both the plow and blower use so you can switch between with ease) assembled and mounting brackets installed on the tractor frame (the only thing I don't like is you have to switch these brackets back and forth between this and the mower deck mounts "not quite WH easy" but after a few times it may not be so bad ), then installed the sub-frame , snow plow and ran the hydraulic lines and plugged into the loader/sector valve. The cab and blower assembly will follow within the next few days/weeks. Pics and a little video of it in operation.








      20210110_163214.mp4
    • Marc M.
      Help with a 416 plow
      By Marc M.
      Hi guys I'm new to the wheelhorse world and i recently picked up a for 416-H and I'm looking to buy/install a plow put on it. I have found one on craigslist but I can't tell if it will work on my tractor or not, it is a wheelhorse plow though. Can somebody please send a photo or even a video of how to hook up a plow to a 416 or equivalent tractor?
      Attached is my tractor and the plow I'm looking at. Will it fix and what's it missing ?!


×
×
  • Create New...