Jump to content
Don_WH

Front Cast Iron Weight

Recommended Posts

Don_WH

Does anyone have any info on this style of front weight ? Original WH ?569bd2f186f8d_wheelhorse(2).jpg.379d79e1

Share this post


Link to post
Share on other sites
 
AMC RULES

 

 

Share this post


Link to post
Share on other sites
 
Don_WH

Thanks !!! I have one of these weights that was my fathers, I did not now much about it other than he used it on one of his early rj's.  I thought it was just something he adapted until I found that picture of a rj on craigslist with one mounted on it. 

Share this post


Link to post
Share on other sites
 
stevebo

If it is for sale, send me a pm. I am interested. (like many others here I am sure)

Share this post


Link to post
Share on other sites
 
buckrancher

I have one it's a FW60 original wheel horse

 

Brian

  • Like 1

Share this post


Link to post
Share on other sites
 
Brrly1

Nice tractor! Haven't done a thing! As the picture shows that's the original front weight on the rj's at which point they went to the front mounted weight with the handle which a think came out in 59 to 60, then they came out with No handle, They also used those on the 69' GT14's for weight on the front end when tiling. I have one of these on my fifty six that I have just haven't got around to getting a pattern made. II believe Hammerhead has a new one, yup, he was the top bidder on that one. If only I was paying attention on that he outbid me I think I stopped  202.50   thought I was top bidder until I looked, about two years back.  I've also found my fuel tank!

Edited by Brrly1

Share this post


Link to post
Share on other sites
 
VinsRJ
23 hours ago, stevebo said:

If it is for sale, send me a pm. I am interested. (like many others here I am sure)

 

Classic

Share this post


Link to post
Share on other sites
 
SPINJIM
On 1/17/2016 at 0:45 PM, Don_WH said:

Does anyone have any info on this style of front weight ? Original WH ?569bd2f186f8d_wheelhorse(2).jpg.379d79e1

 

Hi Don,

How is your front weight attached?   I bought one of those weights at the WH show two years ago, and I'm trying for figure a secure way of attaching it.   Are there just two hooks that go over the front axle?   I cut a large U-bolt in half, and hooked mine over the front axle. It's on that way for now, but I think the weight might bounce off if I hit a bump. 

  Thanks,  Jim

Edited by SPINJIM

Share this post


Link to post
Share on other sites
 
Brrly1

Kind of doubtful. That front weight weighs in at about the same as the front weight with Wheel Horse carved in it. They both weigh in at about 54lbs. Yes it hangs on by 2 hooks, hangers or what ever you want to call them. The picture that you guys keep showing is My tractor!! 56 ride away jr.

Share this post


Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • bigbuck
      By bigbuck
      I'm not positive of the model, but I think I'm close. Please call George at 517-499-5678
    • RJcollector
      By RJcollector
      Ive been thinking about selling my 4 RJ-58s and all the attachments and parts I have. I have 4 tractors-2 have Kohler K91T , 1 has the Clinton and one has no engine. Only 1 is missing the serial number decal. Kohlers run. Clinton needs a carb. I have original exhaust shields AND belt guards for 3 of them. 3 mower decks, 2 plows, cart, 2 spare transmissions, parts breakdowns, original manuals and sale tags, seats, tires.  Not sure if I should sell it as 1 big collection or break it up. And also a good starting price?  I'll post pics when I get a chance. Thanks
    • wh315-8
      By wh315-8
      The RJ58 was the big hit for spectators this year at my local festivals here in Carroll County OH. 
      the children loved getting their pictures sitting on it, then they discovered the bicycle horn under the steering wheel. It’s always a joy even in parades. Just love showing off part of my collection every year and hearing all the stories from those that had WH in their lives at one time. Can hardly wait to get to retirement so I can get some of my other models back to their glory in working order and be able to attend other shows/festivals throughout the year. My fellow tractor enthusiasts always know when a spectacular starts asking about WH, they point in my direction. I study up on the history of the different models and always intrigue those that didn’t know much about how WH came to be. This website is one place that has helped me learn so much about the WH history and I thank you for sharing your knowledge that I am able to pass on to keep WH alive and well.




    • CasualObserver
      By CasualObserver
      Operator manual
      Illustrated parts list
      6 pages 3.73MB
       
      Illustrated parts list #A-7136
      Includes PSB #023 #052 #058 #060 #080
      10 pages 938.48KB
       
      Engines used according to Toro
      Clinton B1290-1107
      Kohler K91-31307A
      Kohler K91-31388A
      Electric start kit
      Electric starter kit model EC-35 for Clinton engine - Listed for 1958 and 1959
      Electric starter kit model EK-35 for Kohler engine - Listed for 1958 and 1959
       
      6-12 tire chains model TC-12 - Listed for 1958 and 1959
       
      Seat cushion Foam rubber with imitation leather cover model FC-24 - Listed for 1958 and 1959
       
      Transmission drive belt 1567 - (4L x 29" or 1/2" x 29")
       
      Details & Attachments
      2 pages 107.33KB
       
      1958 model RJ-58
      1958 serial numbers that have shown up for the RJ-58
      Early models used Kohler K90T-27107D equipped with a Schnacke recoil unit with a backup rope starter contained under the recoil assembly and an oil bath air filter.
      00005
      00251
      01099 - No casting date on trans. Leather gearshift boot, large, round rear wheel hubs, "slab" hitch, replacement engine
      01188 - Has round rear wheel hubs
      01516
      01768
      01789 - No casting date on trans. Leather gearshift boot, 3-ear triangular rear wheel hubs, "slab" hitch, Clinton engine with Schnacke recoil
      01797
      01871
      02525
      03177
      03501 - Located in UK
      03796 - Kohler K90T-27107D with serial 364044 equipped with a Schnacke recoil unit with a backup rope starter contained under the recoil assembly and an oil bath air filter.
      04883
      04885
      05000
      05619
      05714
      05798
      06528 - May be 16528
      06749
      06771
      07633
      07649 - Transmission J12-8 October 12, 1958
      07725
      08440
      08612
      09284
      09337 - Hard to read
      10163
      11432
      11628 - # 3521 spline gear with 10 splines changed to 11 splines in 5003 and 5010 transmissions at serial # 11628 PSB #023
      11916
      12221 - B3-9 trans casting date - Kohler K91 engine with Schnacke recoil
      12291
      14473
      14713
      16097
      16528 - May be 06528
      166x6
      16868 - F4-9 trans casting date - Kohler K91 engine with Fairbanks recoil, solid pan seat without holes
      18348
      June 2023
      18500 and lower 
      Late 1958 units came with a Kohler K-91T-31307A equipped with a Schnacke recoil unit with a backup rope starter contained under the recoil assembly and an oil bath air filter.
      ------------------------------------------------------------------------------------------------------------------
       
      Details & Attachments
      2 pages 106.94KB
       
      1959 model RJ-59
      1959 serial numbers that have shown up for the RJ-59
      Early 1959 units came with a Kohler K-91T-31307A equipped with a Schnacke recoil unit with a backup rope starter contained under the recoil assembly and an oil bath air filter.
      18501 and up - Possible 1100 units built
      20078 - Located in UK
      203xx
      21033
      292xx
      21900 - 1960 Suburban 400 began production at serial #21900 somewhere around Aug-Oct 1959.
      Late model RJ-59 tractors with a Kohler would have a K-91T-31388A with the Fairbanks recoil starter and paper air filter element. The 31388A was also used on the 1960 Suburban 400.
      K91T-31388A Serial 425251 found on RJ-59
    • Vaughan32850
      By Vaughan32850
      Has anyone got a WT-30 tiller they can send pictures if pleas? It’s the one fitted with a K91 engine for RJ models. 
      Many thanks

×
×
  • Create New...