rem722 26 #1 Posted January 16, 2016 Hi Guys, Well after 3 months of hard work here she is. I know its not all original but I made modifications to make it easy to service in the future. The Honda engine and split hood came together nicely. Every bearing and seal and bushing is new. The paint was sprayed on. Hope she cuts grass good after all this work. I was hoping to hear any opinions...... 20 Share this post Link to post Share on other sites
rjg854 11,343 #2 Posted January 16, 2016 That's a great looking job you did there. You should be ecstatic about what you accomplished. 3 Share this post Link to post Share on other sites
DennisThornton 4,769 #3 Posted January 16, 2016 Wow! Maybe the Ponds should have used your hood design. I'm not a rigid purist, especially when the change is a betterment and I think you found two! I really like it a lot! Would have like to have seen the hood splitting process. 7 Share this post Link to post Share on other sites
elcamino/wheelhorse 9,294 #4 Posted January 16, 2016 That is a very nice looking unit. 4 Share this post Link to post Share on other sites
AMC RULES 37,125 #5 Posted January 16, 2016 Cool mods, nice job. 4 Share this post Link to post Share on other sites
rem722 26 #6 Posted January 16, 2016 1 minute ago, AMC RULES said: Cool mods, nice job. Thank you, I appreciate that! 13 minutes ago, elcamino/wheelhorse said: That is a very nice looking unit. Thank you very much! 2 Share this post Link to post Share on other sites
AMC RULES 37,125 #7 Posted January 16, 2016 Any picts of the hinge set up to share here? 2 Share this post Link to post Share on other sites
rem722 26 #8 Posted January 16, 2016 17 minutes ago, DennisThornton said: Wow! Maybe the Ponds should have used your hood design. I'm not a rigid purist, especially when the change is a betterment and I think you found two! I really like it a lot! Would have like to have seen the hood splitting process. Thanks Dennis, I basically made my cut on the hood and then used a bead roller. And the Honda 190cc worked out well too. Thank you for the support. 23 minutes ago, Ranger13148 said: That's a great looking job you did there. You should be ecstatic about what you accomplished. Thanks Ranger for the kind words!!! Share this post Link to post Share on other sites
DennisThornton 4,769 #9 Posted January 16, 2016 I've used a flange maker in an impact hammer to create that lip in flat sheet but it would have failed horribly on the rounds. Any issues with the bead roller on the rounded curves? 1 Share this post Link to post Share on other sites
rem722 26 #10 Posted January 16, 2016 33 minutes ago, DennisThornton said: I've used a flange maker in an impact hammer to create that lip in flat sheet but it would have failed horribly on the rounds. Any issues with the bead roller on the rounded curves? Really its just the opposite. The bead roller it extended enough to accept various depths of metal. I c-clamped a "stop" on the roller as to get a 3/8" bead and cranked it slowly. It worked great. Share this post Link to post Share on other sites
SPINJIM 1,981 #11 Posted January 17, 2016 Beautiful work. Great way to get around the hood problem on the 603. I have a Honda GX 160 that I want to put on my 604, and haven't decided how to modify the hood. Hope you don't mind if I copy your idea. I'd love to see some details of how you hinged the hood. How much did you have to raise the engine to have the pulley line up with the belt guard, etc.? Did I miss some earlier pictures of the work in progress? Be very proud of the job you did. It's a shame to cut grass with it. This year's featured model at the WH show in Arendtsville is Customized Horses. Any chance you'll be bringing it there? I agree that 'improved' or 'customized' tractors are more INTERESTING than restored ones. I have some of both. Great job. 1 Share this post Link to post Share on other sites
rem722 26 #12 Posted January 17, 2016 23 minutes ago, SPINJIM said: Beautiful work. Great way to get around the hood problem on the 603. I have a Honda GX 160 that I want to put on my 604, and haven't decided how to modify the hood. Hope you don't mind if I copy your idea. I'd love to see some details of how you hinged the hood. How much did you have to raise the engine to have the pulley line up with the belt guard, etc.? Did I miss some earlier pictures of the work in progress? Be very proud of the job you did. It's a shame to cut grass with it. This year's featured model at the WH show in Arendtsville is Customized Horses. Any chance you'll be bringing it there? I agree that 'improved' or 'customized' tractors are more INTERESTING than restored ones. I have some of both. Great job. If you like this idea, please go ahead and use it. Maybe you can do better. I simply took a measurement of the old engine in place in reference to the frame for the center of the PTO on the engine. Thank you for the kind words, I really thought guys would say I ruined it. Share this post Link to post Share on other sites
stevebo-(Moderator) 8,330 #13 Posted January 17, 2016 I am a fan for sure. Like the hood set up. 1 Share this post Link to post Share on other sites
rem722 26 #14 Posted January 17, 2016 1 minute ago, stevebo said: I am a fan for sure. Like the hood set up. Thanks Steve!!! Share this post Link to post Share on other sites
oliver2-44 9,673 #15 Posted January 17, 2016 (edited) Great mods and nice restore. Good to hear your going to keep it working! I,m not familiar with a bead roller, so I would love to see a sample of how its done Edited January 17, 2016 by oliver2-44 1 Share this post Link to post Share on other sites
Ed Kennell 37,998 #16 Posted January 17, 2016 How does that go...."A thing of beauty is a joy forever".....enjoy this little beauty. 2 Share this post Link to post Share on other sites
953 nut 55,021 #17 Posted January 17, 2016 Have you patented the hood modifications? I really like the work you have done there. 1 Share this post Link to post Share on other sites
Terry M-(Moderator) 2,175 #18 Posted January 17, 2016 (edited) Just saw this...Have to say thats one very well done custom hood modification . I Like it, Very Well Done!! Edited January 17, 2016 by Terry M 2 Share this post Link to post Share on other sites
Racinbob 11,034 #19 Posted January 17, 2016 When I saw your post in another thread and you mentioned 'splitting the hood' I figured you meant you cut a slot so it could be removed without taking the steering wheel off. That was very common in the 60's. Then I went to this thread. WOW! That looks great! Not only the hood but the entire restoration. 2 Share this post Link to post Share on other sites
Phil854 130 #20 Posted January 17, 2016 Super Job !!! That hood is COOL You should be proud. 1 Share this post Link to post Share on other sites
JC 1965 1,530 #21 Posted January 17, 2016 That's a beauty for sure. Give your self a pat on the back for a job well done. Tanks for sharing. 1 Share this post Link to post Share on other sites
Wishin4a416 2,191 #22 Posted January 17, 2016 Looks great! You did a nice job. I bet it mows for years to come. 1 Share this post Link to post Share on other sites
jb4249 131 #23 Posted January 17, 2016 I like the hood and how you manager it. I'd like to use your design on my Ranger. Any more pictures and details and or measurements would be appreciated. I guess you have a bead roller? My hood is at the metal cleaner now, waiting for it to come back. They are adding 2.5" to the length. hinging the front is a good idea. Ted 1 Share this post Link to post Share on other sites
jeff lary 171 #24 Posted January 17, 2016 Boy that really looks nice , good job ! 1 Share this post Link to post Share on other sites
AlwaysLookin80 1,308 #25 Posted January 17, 2016 Tilt hood was pretty clever. Very nice job. 1 Share this post Link to post Share on other sites