Jump to content
Row Cropper

Front Weight

By Row Cropper, in Restorations, Modifications, & Customizations

Recommended Posts

Row Cropper    60

Row Cropper
Posted

I solved the problem of my big 54" blade pushing my 520 sideways when plowing heavy snow with the blade angled!  Several years ago my neighbor asked me to cut down his basketball pole.  It was a 4" square tube filled with concrete and when I got it down the light bulb came on!  This could be repurposed as a front weight for my plow tractor.  So I cut two sections about 30" long, welded them together and fabed up a carrier bracket which fits in the front tach-a-matic.  The weight itself weighs 77# and the bracket adds another 17.5# for a total of nearly 95% up front.  The carrier bracket has been modified a couple times and it now doubles as my lateral movement limiter and down travel stop.  In the photos you will see the 3/4" rod which engages the slot in my custom built plow frame for sideways movement control and the chain connects to the frame to limit downward travel to maintain engagement of the rod with the slot. Quick on and quick off and it does the job!  

 

image.jpeg

image.jpeg

image.jpeg

image.jpeg

image.jpeg

One more photo showing the carrier bracket mounted to the front Tach-a-mastic.

image.jpeg

  • Like 7

Share this post

Link to post
Share on other sites
 

RedRanger    1,468

RedRanger
Posted

Ingenuity!  And one hell of a bumper.

  • Like 1

Share this post

Link to post
Share on other sites
 

AMC RULES    37,130

AMC RULES
Posted

I'm betting...     :handgestures-thumbsup:

that :wh: ain't sliding no more. 

Share this post

Link to post
Share on other sites
 

can whlvr    993

can whlvr
Posted

:text-goodpost:

  • Like 1

Share this post

Link to post
Share on other sites
 

KC9KAS    4,741

KC9KAS
Posted

Like the lights on the front weight!.....Signal lights??

Share this post

Link to post
Share on other sites
 

Row Cropper    60

Row Cropper
Posted (edited)

KC9KAS - The lights are flashing "hazard" lights.  When we have snow, I clean several driveways in the neighborhood and part of my "route" is on a county highway, so I want to be as visible as possible.  I have flashing reds on the rear.

Edited by Row Cropper
  • Like 3

Share this post

Link to post
Share on other sites
 

AMC RULES    37,130

AMC RULES
Posted

How cool is must be...     :text-woo:

to witness that ol' :wh: put puttin' down the shoulder of the road. 

I'd have to turn back around and snap a pict...or two.   :handgestures-thumbupright:

  • Like 1

Share this post

Link to post
Share on other sites
 

whtractors24    3,116

whtractors24
Posted

gonna have forearms like steal after steering this tractor! :ROTF:

But that front end will never slide any more.

  • Like 1

Share this post

Link to post
Share on other sites
 

Pullstart    62,835

Pullstart
Posted

If you had front brakes I bet you could do "stoppies" with it!

Share this post

Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Go To Topic Listing

  • Similar Content

    • gwood
      seat replacement
      By gwood
      Question: I'm looking at the seat and decal drawing and could use an answer! Does the the seat spring or the adjusters go under the seat? It looks like the adjusters go directly under the seat and then the springs under the adjuster. If so, where does the spacer (110932) go?   The reason I ask is the seat is quit low and the back sets low making it hard for me to reach the brake/ return to neutral pedal.
    • Merl
      520-H with tiller for sale
      By Merl
      Newbie here and I have a 520-H that runs, but needs some TLC and some minor things fixed and/or adjusted. It comes with a like new tiller that I believe has only been used once and has paint still on the tines. I am the 2nd owner and I have personally never used the tiller. I am selling my previous home that I rent and where it has been stored. My current home's yard just isn't big enough to use a rider and I need to find a new home for it. I want to sell them together to simplify and I need them gone in the next 2 weeks. Please reach out with any questions and I'll do my best to answer. I am definitely not as knowledgeable as most of you on this forum, but figured somebody would like to fix it up, part it out and/or needs a tiller. Please email or text.





    • M Robs
      Help with value of 520-H Wheel Horse and accessories
      By M Robs
      Hello - Last year I inherited a 1992 Wheel Horse 520-H Garden Tractor and several accessories. I was able to get it started at the end of last summer and drove it around a bit but I am now looking into get something better suited for my current situation. I have absolutely no idea what the tractor and accessories are worth and would love some ballpark numbers from those in the know. I've attached photos and would love any advice as to what I should try to sell these items for. Thanks so much! 
      The tractor is a 528-H model - 1992 
      289 hours on the hour meeter
      The mower is a Side Discharge Mower?
      48" Snow Dozer Blade - Part No. 810746R1
      36" Tiller
       

       
       
    • qudrcps
      520-H tractor with Eaton 1100 Transaxle "bucking"
      By qudrcps
      I recently started experiencing "bucking" on my 1997 520-H with the Eaton 1100 series transaxle.  This occurred after 500 hours of heavy use with the 60" mowing deck, with all transaxle oil changes performed per specs.  In reviewing causes of "bucking", I came across this for a similar complaint in a Simplicity 4711 that used the same transaxle.  ( simpletractors.com/forums/topic/7441-simplicity-4211-hydro-bucking-problem/ ).  One thought was that this was due to missing or loose bolts securing the transaxle to the frame.
       
      This turned out to be precisely the reason for the "bucking" in mine.  One securing bolt replaced, all other securing bolts tightened (along with the engine bolts), and the Forward-Reverse lever/linkage adjusted and tightened, and the tractor is back to "usual".
       
      It's just something to consider before the nightmare of a transaxle overhaul...
    • r1jakecfd
      Transmission to lift valve hose fittings 520-H
      By r1jakecfd
      Hi Guys,
       
      Does anyone know where you can get the correct size, 90 deg crimp fittings for the hydraulic line going from under the hydro trans to the lift valve on the 520-H? I found a Gates fitting with the correct thread size but it was too long on the thread end. It came down too far under the transmission to allow the hose to come over the frame.
      Hopefully I described this well enough?
       
      Many thanks,
       
      John
×
×
  • Create New...