Shynon 7,459 #1 Posted January 3, 2016 Thought I would show my snowblower wing extensions I made. Helps keep tractor going straight and not getting sucked in. 12 Share this post Link to post Share on other sites
can whlvr 993 #2 Posted January 3, 2016 great idea 3 Share this post Link to post Share on other sites
Wishin4a416 2,191 #3 Posted January 3, 2016 Nice job and with drift cutters too! 3 Share this post Link to post Share on other sites
mikekot3 92 #4 Posted January 4, 2016 Nice modification work and thanks for sharing it. 3 Share this post Link to post Share on other sites
Ed Kennell 38,021 #5 Posted January 4, 2016 Nice work....great idea to improve steering control. Have you had a chance to test it out? Please let us know. 1 Share this post Link to post Share on other sites
JERSEYHAWG / Glenn 4,497 #6 Posted January 4, 2016 4 hours ago, Wishin4a416 said: Nice job and with drift cutters too! That's the words I couldn't think of, drift cutters. Ok, Jack, 2 POINTS there. And yes, a nice job on them. Glenn 2 Share this post Link to post Share on other sites
Shynon 7,459 #7 Posted January 4, 2016 Drift cutters are Ariens, and yes I had these wings on a wheel horse snowblower about 20 years ago and they worked. 1 Share this post Link to post Share on other sites
RedRanger 1,468 #8 Posted January 4, 2016 Very nice job! Nice quality. 1 Share this post Link to post Share on other sites
cleat 5,808 #9 Posted January 4, 2016 Makes it straight down the side like the 2 stage. I was blowing ice crystal snow around 4" deep capped with a layer of ice a few days ago with it. Problem with that one is the blower wanted to push back into the already blown path. Better in that it did not get you stuck but it took a few tries to get the sides done. I have not tried ou the single stage yet, but if it pulls you into the snow that could be a problem for sure. Your sides look great BTW. Cleat 1 Share this post Link to post Share on other sites
JC 1965 1,530 #10 Posted January 4, 2016 Great job, I can see where that would help. Looks like you have the extensions supported very good also. Thanks for sharing. 1 Share this post Link to post Share on other sites
shallowwatersailor 3,213 #11 Posted January 4, 2016 Interesting modification and nice fabrication. I have thought of using a drift cutter like what European snowblowers have. It is a square hoop that projects out that cuts into the drift. I haven't noticed that reaction though with my 523Dxi and the single-stage snowthrower. The additional ront end weight that I have could be factor 1 Share this post Link to post Share on other sites
jeff lary 171 #12 Posted January 4, 2016 I wanted to make some drift cutters for this winter but have not done that yet. Yours look great you may have inspired me ! 1 Share this post Link to post Share on other sites
