cleat 5,808 #1 Posted January 3, 2016 After finding all of my tractors had at least somewhat worn deck roller shafts I decided to make new ones. Deck roller shaft.pdf I used Stainless steel for the pins. Cleat 4 Share this post Link to post Share on other sites
KC9KAS 4,741 #2 Posted January 3, 2016 Very nice. You have been quite busy building new axle pivot pins and now the deck roller pins. Can't beat productive shop time! Share this post Link to post Share on other sites
Don1977 604 #3 Posted January 3, 2016 I've replaced my roller shafts a few times using the original plates that came on my 75 series deck. Just grind down the weld and punch the old shaft out. Share this post Link to post Share on other sites
cleat 5,808 #4 Posted January 12, 2016 Here are the pins welded up ready for installation. Cleat 2 Share this post Link to post Share on other sites
857 horse 2,581 #5 Posted January 14, 2016 Man,,,that loooks nice...!!!!!!!!!!!!!!!!!!!!! 1 Share this post Link to post Share on other sites
857 horse 2,581 #6 Posted January 14, 2016 12 hours ago, 857 horse said: Man,,,that loooks nice...!!!!!!!!!!!!!!!!!!!!! LET US KNOW WHEN YOU MAKE A DOZEN AND START SELLING THEM 1 Share this post Link to post Share on other sites
