budman2 57 #1 Posted January 1, 2016 Can anyone tell me if there is a cup holder available for my 1993 520H, was looking for one of those that attach to the fender on the right side of tractor, that just screws down as I don't want to cut a big hole in the fender! Any help would be appreciated, I tried toro dealer they did not know if the one that I found on partstree.com would mount, that part# is 1040838. Thanks budman2 Share this post Link to post Share on other sites
WNYPCRepair 1,914 #2 Posted January 1, 2016 Search the forum for cup holder. You should find a couple of topics about one for the 300 series. It matches up to the fender fine. I ordered one but never got around to actually mounting it. When I search, I can't open the topic for some reason, I get this error. Share this post Link to post Share on other sites
elcamino/wheelhorse 9,295 #3 Posted January 1, 2016 I got that notice on two or three things I was trying to look at last night. They all had an October date if I remember correctly. Share this post Link to post Share on other sites
nylyon-(Admin) 7,268 #4 Posted January 1, 2016 It shouldn't show in search, the topic is probably in the old classified section which I have removed access to which is why the permissions error. Share this post Link to post Share on other sites
WNYPCRepair 1,914 #5 Posted January 1, 2016 11 minutes ago, nylyon said: It shouldn't show in search, the topic is probably in the old classified section which I have removed access to which is why the permissions error. It's in Wanted, is that no longer available? Share this post Link to post Share on other sites
nylyon-(Admin) 7,268 #6 Posted January 1, 2016 Nope, I'll have to figure out why it's in search, it really shouldn't be. I removed the old classified a few days ago. Share this post Link to post Share on other sites
Ed Kennell 38,021 #7 Posted January 1, 2016 (edited) My custom cup holders on all my horses.....A Folgers coffee can. Edited January 1, 2016 by ekennell 4 Share this post Link to post Share on other sites
WNYPCRepair 1,914 #8 Posted January 1, 2016 OK, what is the butter spray for? 1 Share this post Link to post Share on other sites
Rollerman 290 #9 Posted January 1, 2016 4 minutes ago, WNYPCRepair said: OK, what is the butter spray for? Spray the snowblower & shoot with it to keep the snow from building up or sticking. 2 Share this post Link to post Share on other sites
WNYPCRepair 1,914 #10 Posted January 1, 2016 2 minutes ago, Rollerman said: Spray the snowblower & shoot with it to keep the snow from building up or sticking. I figured that was it. Share this post Link to post Share on other sites
Ed Kennell 38,021 #11 Posted January 1, 2016 Yep, I use it to blow snow, to launch my boat and to make flapjacks. 3 Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,031 #12 Posted January 1, 2016 Suspect this is it and dated around 2001 so models listed would be appropriate Garry 1 Share this post Link to post Share on other sites
squonk 41,018 #13 Posted January 1, 2016 I think there may be a few of them for sale at the Big Show along RS Row! 1 Share this post Link to post Share on other sites
WNYPCRepair 1,914 #14 Posted January 1, 2016 4 hours ago, gwest_ca said: Suspect this is it and dated around 2001 so models listed would be appropriate Garry That looks like the one I bought, and it seemed to fit on the 520 fender just fine Share this post Link to post Share on other sites
DougC 2,641 #15 Posted January 1, 2016 I just can't drill holes in my rear fender, but I just might try the coffee can/wire tie to the cab brace trick. I could make toast with the Harbor Freight cab heater and then spray on the butter while I plow and still have one hand on the steering wheel.... 2 Share this post Link to post Share on other sites
WNYPCRepair 1,914 #16 Posted January 1, 2016 I thought about trying double sided tape. I didnt want to drill the fender either, though I will if the tape doesn't work 1 Share this post Link to post Share on other sites
JPWH 6,032 #17 Posted January 1, 2016 DougC, when you do please post a video. 1 Share this post Link to post Share on other sites
Ed Kennell 38,021 #18 Posted January 1, 2016 2 hours ago, DougC said: I just can't drill holes in my rear fender, but I just might try the coffee can/wire tie to the cab brace trick. I could make toast with the Harbor Freight cab heater and then spray on the butter while I plow and still have one hand on the steering wheel.... Hey Doug, You probably also have the foot control for F/R motion to free up your right hand. I'm now working on a right knee pad control for the hyd lift to free up my left hand so I can dedicate it to donut and coffee control. Now if I could only find some snow to try it out on. 3 Share this post Link to post Share on other sites
