kasey54 305 #1 Posted December 24, 2015 Does anyone here know if this is a real rare item? I can't find a thing on it anywhere I've looked. Share this post Link to post Share on other sites
oldredrider 2,548 #2 Posted December 24, 2015 Not that common. I've only seen one. If I remember correctly, they were for a verticle shaft tractor but don't know which one. Share this post Link to post Share on other sites
JAinVA 4,619 #3 Posted December 24, 2015 I hate to disagree but I have 2 of them.It is the shell for a 36" SD that are used on the c,300 400 and 500 series.Luck JAinVA Share this post Link to post Share on other sites
JAinVA 4,619 #4 Posted December 24, 2015 Sorry guys my mistake.I didn't notice the left hand discharge.It looks exactly like my right hand discharge decks.The four bolt spindle mount and single front roller are the same.The 36" RDs look the same.I will have to say it might be rare at that.JAinVA Share this post Link to post Share on other sites
gwest_ca-(File Mod) 10,919 #5 Posted December 24, 2015 There were a few side and rear discharge 1969 5-7361 36" CCW RD 1970 5-2365 36" CCW SD 1970-71 5-7362 36" CCW RD 1971 5-0700 36" CCW SD 1972 5-0610 36" CCW RD 1972 5-0701 36" CCW SD 1973 5-0611 36" CCW RD 1973 5-0702 36" CCW SD http://www.wheelhorseforum.com/search/?q=ccw&type=downloads_file Garry Share this post Link to post Share on other sites
can whlvr 993 #6 Posted December 25, 2015 never seen one before,thats cool Share this post Link to post Share on other sites
Terry M-(Moderator) 2,158 #7 Posted December 25, 2015 (edited) Just a thought, and I don't mean to be funny....would that be a U.K.or other " meant for overseas " mower deck? Maybe Kinda like driving on the left side?? Edited December 25, 2015 by Terry M Share this post Link to post Share on other sites
RedRanger 1,468 #8 Posted December 25, 2015 Looks like a chopped up and modified RD to me. 1 Share this post Link to post Share on other sites
Terry M-(Moderator) 2,158 #9 Posted December 25, 2015 (edited) 6 minutes ago, RedRanger said: Looks like a chopped up and modified RD to me. If so , They're a Master Craftsman in metal working. Now that I look more at it......They could have just added the baffles and just cut and welded the left discharge section......you could br right @RedRanger... Edited December 25, 2015 by Terry M 1 Share this post Link to post Share on other sites
Shynon 7,450 #10 Posted December 25, 2015 6 hours ago, kasey54 said: Does anyone here know if this is a real rare item? I can't find a thing on it anywhere I've looked. Is that a model/ serial # tag? if so what is the model number Share this post Link to post Share on other sites
cleat 5,697 #11 Posted December 25, 2015 My old Simplicity was left hand discharge. The blades spun in the opposite direction to most and I had to buy actual simplicity blades. Cleat Share this post Link to post Share on other sites
Ed Kennell 37,469 #12 Posted December 25, 2015 Rear discharge for sure.....with baffles and side opening added. I have one (RD) that was converted to a SD. Share this post Link to post Share on other sites
Terry M-(Moderator) 2,158 #13 Posted December 25, 2015 (edited) Hard to say.Just looked at some pics of these type of decks and it looks to be well done if its a modification. But like Cleat mentioned, you'd need different blades... Edited December 25, 2015 by Terry M Share this post Link to post Share on other sites
Terry M-(Moderator) 2,158 #14 Posted December 25, 2015 Share this post Link to post Share on other sites
kasey54 305 #15 Posted December 25, 2015 As far as I can tell this is factory done. If I'm reading the tag right it says Mod. 5 2365 Ser. 728558 1 Share this post Link to post Share on other sites
oldredrider 2,548 #16 Posted December 25, 2015 That # is listed above in Gary's reply. Note ccw rotation; this is not a "fabricated" deck, but a factory item. 3 Share this post Link to post Share on other sites
roadapples 6,983 #17 Posted December 25, 2015 Kinda like NASCAR turning right... Share this post Link to post Share on other sites
