davedean 2 #1 Posted December 19, 2015 I had to cut the chain off a snowblower (06-42st01) and didn't take note of how it's routed. Any pics or help please? Share this post Link to post Share on other sites
pfrederi 17,518 #2 Posted December 19, 2015 From the drive sprocket down under the front idler then back to go around the main drive sprocket then up to the front top idler around that and back to the the drive sprocket. Chain should contact the drive (auger) sprocket from about 7 to 11 oclock Share this post Link to post Share on other sites
gwest_ca-(File Mod) 10,921 #4 Posted December 19, 2015 Scroll down this page for a photo and a diagram Garry Share this post Link to post Share on other sites
pfrederi 17,518 #5 Posted December 20, 2015 I was wrong sorry. Tried to do it from memory as getting about with a ruptured Achilles Tendon is difficult. Again sorry for my error in routing. Share this post Link to post Share on other sites
davedean 2 #6 Posted December 21, 2015 That's OK someone had a sketch on this site. Piece of cake Share this post Link to post Share on other sites
