854

[rjg854 11,356]

I'm looking for you wonderful folks here at to critic this new purchase.  Tell me what you think it may need or what possibilities there are for it.  I'm open to all suggestions and information.  It seems to be in good shape, and mostly complete.

Edited November 22, 2015 by ranger13148
grammar

[AMC RULES 37,130]

Awesome  survivor...    

heres hoping you don't restore it. 

[rjg854 11,356]

I'm probably going to leave it as it is.  But the drive belt guard is all rust, and no paint.  What could I do with that?

[AMC RULES 37,130]

Knock the rust down with a very light sanding...  

then give it an oil bath, while you look for one in better condition. 

You're going to  need a push button starter switch for the hole in the trans tunnel too. 

Not sure if this one is the same one for your application, but I'll send you the link. 

Edited November 22, 2015 by AMC RULES

[squonk 41,050]

Ya got your tractor. Now whatca gonna do for fun? 

[AMC RULES 37,130]

You'll need the steering wheel center cap #1 here too...

http://www.wheelhorseforum.com/topic/22072-03-knobs-and-inserts-17-items-here/

[squonk 41,050]

I just noticed the rear tires. General Garden Tractor SS's. I remember that brand on our 64 604 when I was a kid. 

[rjg854 11,356]

3 minutes ago, squonk said:

Ya got your tractor. Now whatca gonna do for fun? 

Well to start with, working on the tractor to get it running nice.  Got some carburetor issues right now.  I think someone might have installed the tierods wrong?  The rod that holds the hitch on has been sawed off on both ends so I does and can't put a hitch on it. etc

[WheelHorse79 271]

Your tank stand is interesting.  I believe all 854s were key start only with no starter button (or hole).  Mine was that way when I bought it.  However, my tank stand had been ripped open around the gear shift lever, so I bought a '63 753 tank stand which had the extra starter hole. So, if your tank stand is original, I'm surprised that it has the extra starter hole.  Maybe your tractor is an early production model using the previous year tank stand?

 

[AMC RULES 37,130]

Couple pictured in the gallery with push button starter switches too. 

http://www.wheelhorseforum.com/topic/4303-1964-854/

[squonk 41,050]

You can get a new switch just like the one Craig posted at Napa

[rjg854 11,356]

Think maybe some one might have cut the hole the key switch is in now?  Seems odd the hole is in part of the decal.

[Terry M-(Moderator) 2,175]

16 minutes ago, WheelHorse79 said:

Your tank stand is interesting.  I believe all 854s were key start only with no starter button (or hole).  Mine was that way when I bought it.  However, my tank stand had been ripped open around the gear shift lever, so I bought a '63 753 tank stand which had the extra starter hole. So, if your tank stand is original, I'm surprised that it has the extra starter hole.  Maybe your tractor is an early production model using the previous year tank stand?

 

My original, unrestored 854 has the empty push button holes with key start and is an early production 854 as per the serial # ....just saying

Edited November 22, 2015 by Terry M

[Brian01 481]

Great looking Tractor! 

 

Oh and as far as the rusty belt Guard.  Get some CLR and a scotchbrite pad, the CLR will take most of the rust away n probably get some of the factory paint, shining through

Edited November 22, 2015 by Brian01

[rjg854 11,356]

I'll give that a try Brian, thanks for the suggestion

11 minutes ago, Terry M said:

My original, unrestored 854 has the empty push button holes with key start and is an early production 854 as per the serial # ....just saying

 

11 minutes ago, Terry M said:

My original, unrestored 854 has the empty push button holes with key start and is an early production 854 as per the serial # ....just saying

is your key a fat square key?

Edited November 22, 2015 by ranger13148

[Terry M-(Moderator) 2,175]

5 minutes ago, ranger13148 said:

I'll give that a try Brian, thanks for the suggestion

 

is your key a fat square key?

No, just regular Cole hersey key......Like a dummy, I have no pic of the key in the hole to show you.

[rjg854 11,356]

I'll get a picture of my key and post it tomorrow.

[Racinbob 11,048]

That's definitely a dandy. The 854's used a key switch and not a push button. The key switch did bear the full starter current though so you'd need to get the appropriate one. The ones with the push button starter were undoubtedly installed because they didn't have the proper key switch to handle the current. They could have installed a solenoid. No harm done. The tie rods are on wrong. They must have connected them from the backside on the steering shaft plate. Should be from the front with the nut on the back. They should connect to the spindles from below with the nut on the top. All simple fixes though.

Edited November 22, 2015 by Racinbob

[JERSEYHAWG / Glenn 4,497]

I think its great, looks complete, nice and straight.

 

Glenn

[Shynon 7,459]

2 hours ago, AMC RULES said:

Awesome  survivor...    

heres hoping you don't restore it. 

[Terry M-(Moderator) 2,175]

Ranger, keep that belt guard!!! 

[Brian01 481]

I agree Terry, CLR and a good scrubbing followed possibly by some WD40 and she'll look great

[jackhammer 546]

Good looking tractor

 

Nice find

[rjg854 11,356]

20 hours ago, Terry M said:

No, just regular Cole hersey key......Like a dummy, I have no pic of the key in the hole to show you.

here are some pictures of the key I have for the tractor

[RedRanger 1,468]

3 hours ago, ranger13148 said:

here are some pictures of the key I have for the tractor

That's factory?????