HokieAg07 129 #1 Posted November 9, 2015 Terry, would it be possible to reproduce the overlay for the idiot lights on the top of the dash on the 520 tractors? 2 Share this post Link to post Share on other sites
new horse 44 #2 Posted April 3, 2016 hello, I was wondering if you ever found a replacement overlay for your light panel?? I'm new to the wheel horse family, and also need the same overlay for my 520H. best regards curt Share this post Link to post Share on other sites
HokieAg07 129 #3 Posted April 3, 2016 78-8350 is the Toro part number for a new overlay. They are now red instead of black, FYI Share this post Link to post Share on other sites
Kurt-NEPA 755 #4 Posted April 3, 2016 I tried the red one from Toro, but the location for each light was wrong for my 88 520H.. So I cheated. I scanned in the red one. Opened it in Photoshop and changed the red to black, then moved the text to where it should be. Then printed it with an Ink Jet printer on transparency paper and cut it out.. I put white PVC tape on the back and glued it the dash. Its not a perfect solution, but its better than nothing and has been working well for 2 years now. I hope Terry responds and is able to make them. 3 Share this post Link to post Share on other sites
new horse 44 #5 Posted April 3, 2016 heck Kurt, it sounds like YOU should be making them and selling replacements!!! I believe I've found a replacement/used dash bezel that still has the overlay on it, I'm going to buy it and just swap the whole dash on mine. Curt 1 Share this post Link to post Share on other sites
Vinylguy 4,674 #6 Posted May 20, 2016 On 4/3/2016 at 1:17 PM, Kurt-NEPA said: I tried the red one from Toro, but the location for each light was wrong for my 88 520H.. So I cheated. I scanned in the red one. Opened it in Photoshop and changed the red to black, then moved the text to where it should be. Then printed it with an Ink Jet printer on transparency paper and cut it out.. I put white PVC tape on the back and glued it the dash. Its not a perfect solution, but its better than nothing and has been working well for 2 years now. I hope Terry responds and is able to make them. Sorry I missed this post Kurt. If you email me a pdf file of your panel I will print one on my vinyl for you to experiment with? 2 Share this post Link to post Share on other sites
Kurt-NEPA 755 #7 Posted May 22, 2016 On 5/20/2016 at 0:34 PM, Vinylguy said: Sorry I missed this post Kurt. If you email me a pdf file of your panel I will print one on my vinyl for you to experiment with? Hi Terry, I'll send you what I have. Maybe you can do your wonders with it. Thanks, Kurt Share this post Link to post Share on other sites
cleat 6,297 #8 Posted May 22, 2016 I will scan one for the 520-HC (or 516) and send it to you as well to have on file. Share this post Link to post Share on other sites
new horse 44 #9 Posted May 22, 2016 I would be very interested in buying a couple of these, I need one, and it would be great to always have a extra! Share this post Link to post Share on other sites
cleat 6,297 #10 Posted May 23, 2016 Hi Terry; I sent you the pictures and dimensions. Share this post Link to post Share on other sites
Vinylguy 4,674 #11 Posted July 30, 2016 I finally got back to this project and have a test decal for the panels shown below. I have made a thick test decal with 2 layers of laminate to make them thicker. 3 Share this post Link to post Share on other sites
cleat 6,297 #12 Posted July 30, 2016 They look great, I may get one of each added to my next order just to have here as spares. Share this post Link to post Share on other sites
Vinylguy 4,674 #13 Posted July 30, 2016 4 hours ago, cleat said: They look great, I may get one of each added to my next order just to have here as spares. Not sure how they will work as the originals are applied over a thin clear adhesive backed plastic film for rigidity over the bulb area? 3 Share this post Link to post Share on other sites
cleat 6,297 #14 Posted July 30, 2016 They seem to be a very dark burgundy plastic film that red light shines through. Cleat Share this post Link to post Share on other sites
new horse 44 #15 Posted July 30, 2016 I would like to purchase a set, when/are they available?? Share this post Link to post Share on other sites
Vinylguy 4,674 #16 Posted August 16, 2016 http://www.redoyourhorse.com/520-warning-light-panel-decal-design-1/ Here is a picture of the test decal on. He said the light shows up just not quite as bright as the original. Will be finishing up a couple other layouts soon and listing 5 1 Share this post Link to post Share on other sites
Kurt-NEPA 755 #17 Posted August 17, 2016 Wow Terry! They are looking great! 1 Share this post Link to post Share on other sites
HokieAg07 129 #18 Posted September 4, 2016 Looks good Terry, good work! Share this post Link to post Share on other sites
JERSEYHAWG / Glenn 4,497 #19 Posted October 1, 2016 Hey Terry, do you think you can do one for a 520-8? They are different. Glenn Share this post Link to post Share on other sites
Donald Hill 0 #20 Posted January 10, 2021 I just bought a 520h and am in need of the idiot light panel overlay, are they being reproduced now? Don Share this post Link to post Share on other sites
Kurt-NEPA 755 #21 Posted January 10, 2021 2 hours ago, Donald Hill said: I just bought a 520h and am in need of the idiot light panel overlay, are they being reproduced now? Don Try Terry's internet store. http://www.redoyourhorse.com/ Share this post Link to post Share on other sites
Donald Hill 0 #22 Posted January 16, 2021 Yeah, I looked at his site but didn't see any there. Thanks for the reply! Share this post Link to post Share on other sites
Kurt-NEPA 755 #23 Posted January 16, 2021 6 minutes ago, Donald Hill said: Yeah, I looked at his site but didn't see any there. Thanks for the reply! Try this https://www.redoyourhorse.com/520-warning-light-panel-decal-design-1/ Share this post Link to post Share on other sites
