John Deere 832 snow blower auger pulley needed

[mikekot3 92]

Working on a John Deere 832 snow blower. On the machine is a tag which states: type W2132 and serial number is 004494M.  I need a new or good used Auger pulley. The John Deere part number is AM105653.
The pulley measures 8.5 inches outside diameter and the inside diameter 1 inch. Does anyone have one of these pulleys or know a reasonable substitute?
Please advise,
mike kotarba
mkotarba@hotmail.com

[Pullstart 63,201]

I purchased a pulley for my rear tiller on ebay from a large surplus vendor.  It is much beefier than stock and priced decent.  I want to say it was something like $30 shipped.  You might have better luck buying new...

[gwest_ca-(File Mod) 11,133]

Princess Auto in Canada has these so you may find a farm supply with them also. 8" and 9" are available but fit both 1/2" and 5/8" belts so it may work. You purchase a hub to fit the shaft and weld together.
http://www.princessauto.com/en/detail/9-in-weld-on-pulley/A-p8033821e

Hub
http://www.princessauto.com/en/detail/1-in-w-series-weld-on-hub/A-p3845211e

Garry

[mikekot3 92]

Thank you everyone for the tips on the pulley. I used ebay and used john deere 832 8.5 inch pulley as a search criteria. There is a vendor whom is making replacement  pulleys for 100 dollars plus fedex shipping of 15 dollars woo hoo !!
 

Edited November 8, 2015 by mikekot3