Reo ST-267 walk behind blower belt routing

[Timothy 0]

I just got one of these snow blowers I need to find a good pic of the belt routing and the part numbers for the belts.

[gwest_ca-(File Mod) 11,148]

Welcome to the forum.

http://www.wheelhorseforum.com/search/?q=st-267&type=downloads_file&sortby=relevancy&page=1

Garry

[bmsgaffer 2,046]

I've never even heard of these before but ironically enough I did run across a forum member selling these very belts:
http://www.wheelhorseforum.com/topic/59331-wheel-horse-walk-behind-blower-belts/

[trainman 0]

Ok since I wrote this I found the belts Now I need to find a seal if anyone has nos parts it's a oil seal for the snow blower gearbox I have yet to find one. Part number is mw-10459

[gwest_ca-(File Mod) 11,148]

You should have no trouble getting a seal from a bearing shop or Napa. Try this link
http://www2.chicago-rawhide.com/popup_parts_lookup_457010.htm

The seals are listed by shaft size so a .750" shaft will have a CR/SKF part number in the 75xx range + or -. Using vernier calipers determine the bore diameter the seal goes into and the depth of the seal.
Enter shaft size in the 2nd box (ie .750)
These are the seals Napa carries.
If you have trouble post the dimensions.

Garry

Edited October 18, 2015 by gwest_ca