60" mower questions

[mancanic2 4]

I recently purchased a nice used 60" deck. Pto belt frayed and spindle belt went under center pulley. Am I correct that spindle belt goes on the bottom pulley, as it is very tight and level on the upper center spindle. pics can be uploaded as needed.


Thanks,

dale

[gwest_ca-(File Mod) 11,031]

Model 520 tractor?

http://www.wheelhorseforum.com/search/?q=78390&type=downloads_file&sortby=relevancy&page=1

IPL is illustrated parts list
OM is operator manual

Garry

[tommyg 152]

My spindle belt rides on the top. The belt from the PTO is on the bottom, which is a bit of a pain when removing the mower deck, but that's another issue. Maybe this pic will help.

[WNYPCRepair 1,914]

Mine goes on the bottom pulley, drive belt on top

What model number is your deck?
 

[gwest_ca-(File Mod) 11,031]

The 520-Series have the drive belt on the bottom and the spindle belt on top.

The 5xi-Series  have the drive belt on top and the spindle belt on the bottom.

Garry

[WNYPCRepair 1,914]

Mine is a 520, and I am sure the drive belt is on top
 

[cleat 5,808]

Mine in on the bottom as well trapped under the spindle belt.

Has not caused much grief in removing the deck, I just leave the belt in and remove the mule drive with the deck.

Cleat

[WNYPCRepair 1,914]

I just double checked, my drive belt is on top, spindle on bottom. I don't think my belt would be long enough if it were reversed.
 

[gwest_ca-(File Mod) 11,031]

Looks like the 115223 belt routing decal was used on all the 60" decks for the 520-Series.

http://www.partstree.com/parts/toro/parts/115223/
If the link does not work click on the More Details for Toro

Garry

[cheesegrader 433]

Both of my 60" decks have the drive belt on the bottom, spindle belt on top.
Both have the same decal showing this order.