wheelHorse 312-8

[wheelHorse 312-8 0]

Hello,
I am new to this forum and would really appreciate someone's help.
I have a 312-8 with a broken deck.
Someone is selling a 48" deck off of a D200 model but I am not sure if it will fit on my tractor and don't want to drive 120 miles in each direction to pick it up and find out it doesn't!

So that is my question, will a 48" deck off a D200 fit on my 312-8?

(He was not able to get a serial Number off the mower deck)

Thanks

[64s 83]

No the d-series decks don't interchange.  But there a plenty of decks that will fit (I think any year from the early 80's to 2000's).  Someone here probably has one, just put an ad in the wanted section.

[slammer302 2,155]

you will need a deck from a C-series or 300-400 series 42'' side discharge or rear discharge would work good a 48" deck will work too as long you keep your grass mowed regularly I think a 48" deck can be alot for a 12hp but my  dad used a 48" deck for awhile on a c-121 and it worked fine but he did say it was a little bit too much in the thick grass  

[daveoman1966 3,752]

The 48" deck from the D series will work.  It is, after all, only one of THOUSANDS that were stamped with very little difference.  You will only need to swap-over SOME of the Tach-o-Matic lift hardware from your C series deck and bolt it onto the D series....not much to it.  HOWEVER..... the D series deck uses the older Double D spindle-pulley-blade configuration and the replacement parts for that style are becoming scarce, if available at all.  To preclude issues with that, if you want, you can even move the spindles, pulleys, belts and all from your C series onto the D series deck with very little complication.       
I'm not saying it is an immediate hook-up directly.  If you can turn a wrench, you can swap over the hardware and it'll work fine.