Jump to content
Sign in to follow this  
Followers 0
rockbuilt

Stuck

By rockbuilt, in Transmissions and transaxles

Recommended Posts

rockbuilt    7

rockbuilt
Posted

The good news is I just acquired a 520H the bad news is the trans seems to be stuck it's disengaged (it will roll free forward and reverse) but the linkage arm on the top is stuck it won't move in either direction I don't want to force it.. any help would be greatly appreciated 

Share this post

Link to post
Share on other sites
 

rmaynard    15,588

rmaynard
Posted

Where is the motion control lever stuck? Does it appear to be in neutral? If you can start it, the linkage must be in the neutral position in order to activate the neutral safety switch. With the engine off, I would start by disconnecting the linkage from the cam plate under the seat and see if you can move the speed control arm. Then try moving the rest of the linkage until you find where it is binding.

  • Like 1

Share this post

Link to post
Share on other sites
 

squonk    41,310

squonk
Posted

The cam on top of the trans pump gets lots of wear and digs into the cam plate. Check there.

Share this post

Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  
Followers 0
Go To Topic Listing

  • Similar Content

    • BuffaloD200
      HELP! D-Series Clutch
      By BuffaloD200
      '74 D-180
       
      My friction disc in gone on my clutch.  I saw the old post about making a new friction disc, so I'm not concerned about that.
      I managed to remove the front clutch plate and double v-belt pulley.  But I can't separate the two.  When I took the assembly off the spiraloc washer popped off on its own.  I HAVE READ THE MANUALS.
      So I should be able to just remove the pulley from the front clutch and continue with step 4.  The v-belt pulley is loose as all hell and flops around like a dead fish.  It seems to be hung up on a ring or bearing race.  
      So my thoughts are grab a BFH or sparky the blue tip wrench.
      Is there an unpublished step 3.5, or some trick?
    • Poppa Phill
      60 inch Deck Mule
      By Poppa Phill
      Ive Got an 88 520 and a 60 inch deck. 
      My 522 gave up the ghost and being up here in maine I refused to buy a JD .
      Needing the deck mule with the spring,
      also looking for a soft cab.
       
      Thanks
    • Joe Reese
      60 Inch Mower Deck
      By Joe Reese
      60 Inch wheel horse mower deck with no rot. All spindles greased and spin smoothly. Comes with mule pulley guard & deck belt covers and the rare offset front mule. Has standard blades installed. Have brand new gator mulching blades for an additional $50 Great       Joe Reese    



    • giant_g2
      8 spd Transmission for sale
      By giant_g2
      Not sure on specific model. This 8 spd came attached to a plow I bought. It had some water in it for a couple weeks according to the prior owner. I drained it, sloshed some diesel in it, drained that, then filled with fresh oil. Spinning the input shaft by hand, I can see the axels turn. Hasn't leaked any oil. I'm not really interested in shipping, so I'd prefer local sales.

    • Duramax7man7
      $1,175 OBO [419 hrs] 93 312-8 w/ 520h FS Axle + 42" Deck
      By Duramax7man7
      Very Solid tractor!

      Newer Agro Tires on Rear and Solid Front Turf Tires. Wheel Weights on rear. Fully Swapped Forward Swept axle off of 520h. I ran my 60" Deck on this tractor for over a year with no issues. 
      Deck it solid top to bottom with no rot and newer blades. Belt and Pulley are good to go! 
      She's just a little dusty and needs a cleaning. Can get a nice Seat a Tractor Supply. 
       
      $1175 OBO   -POOS

      (248) 9for3-8six3four Text or Call. I do not visit this site enough. God Bless. 

      NEW SEAT INSTALLED ON THIS TRACTOR! Started it up and ran it for a while yesterday... Forgot how nice this thing is. Tempting to keep it but it's time to send her one her way. GREAT TRACTOR! 


       


×
×
  • Create New...