Wheel-Horse B111 Engine

[Gummix 0]

Hello, 
we have an old B111 with a defective motor (piston jamming).
Now I try to get the belt pulley, but this sticks.
Before I try it with even more strength try I wanted to ask if its works on this away generally.
It screws that inside was I removed (where the proof puller sits in)

I hope u can give me a Tipp

Thanks

[daveoman1966 3,762]

You took the bolt out...right?
ps...I you break that PTO assy, I have all the parts for it here.
my direct email is:
daveoman@windstream.net
 

[Gummix 0]

Hi, yes i tool the bolt out.

I try to heat it up, may it works on this way.

Thank u

[Gummix 0]

Has someone an exploded View from all Parts of the B111? i dont find it in the database.

[daveoman1966 3,762]

GO HERE....  Clik the PARTS tab, then enter  B-111.  You'll see 4 or 5 years of them listed.  Clik on any one of them for schematic.
http://www.toro.com/en-us/pages/default.aspx

[stevasaurus 22,909]

Welcome to Red Square    Here is a link...they are in the manuals section on the main page...I think 1978 & 1979.    If you do a search for B 111, there are a few threads with a lot of information.
http://www.wheelhorseforum.com/files/file/3589-tractor-1978-b-111-4-speed-da-tipl-snpdf/

[Gummix 0]

Thank u

[Gummix 0]

Hi, i dismantled the engine.
It wasnt a piston seizure the piston rod seizure into the crankcase (upside) so the motor is complete broken....
Did u guys have any idea where i can buy a complete new motor (preferably in EU) or what it will cost to ship one to Germany?
Or are there any ohter Motortyps that may can be used?

Thank u

[Gummix 0]

Hi,
nobody with an idear?

Edited September 13, 2015 by Gummix

[slammer302 2,155]

i have no idea were to but one in the EU but i have one not sure what shipping would be probably more than its worth though