tugbert1 4 #1 Posted August 20, 2015 This is my original RT366 mounted to our family 875. A while back my Dad lent the tiller to my uncle. He brought all of it back except for the double V pulley that mounts to the hydro output shaft to drive the tiller. does anyone have or know where I could get one Part # is 6887 according to the original manual 1 Share this post Link to post Share on other sites
DougL3 63 #2 Posted August 20, 2015 Just wanted to say hello from 20 minutes up the road in China Grove! Good luck on the pulleys. Share this post Link to post Share on other sites
tugbert1 4 #3 Posted August 20, 2015 Thanks, good to meet you. These things are becoming harder and harder to find Share this post Link to post Share on other sites
tugbert1 4 #4 Posted August 21, 2015 Ok Here it is. Did not get any replies with info on the original pulley availability and / or photos of one so I made this rig. Will see how it works this weekend Share this post Link to post Share on other sites
tugbert1 4 #5 Posted August 22, 2015 Here it is...pics to follow...Wheel Horse has got to be the best "little" tractor in the world at 50+ with no major rebuild it puts the new tractors on the market to shame (no the new tractors should be ashamed of themselves...their makers too...mere toys). She maintained 7 acres of lawn, snow, gardens and anything you could throw at her for 50 years ****50 YEARS**** once more ****50 yes 50 years**** without a grunt or complaint at a third less hp than the new offerings. For Pete's sake my dad drug a milk tanker semi to the gas station after it failed How Bad A$$ is that. Today even though it could belong to AARP this little horse will leave you in awe. 3 Share this post Link to post Share on other sites
JC 1965 1,530 #6 Posted August 22, 2015 Great lookin little tractor.Good luck with the pulley and Share this post Link to post Share on other sites
Furious 23 #7 Posted May 19, 2016 Nice tractor. I just picked up a used tiller for my 1277 but it didn't come with anything but the tiller. Do you have pictures of your setup? I'd like to go with the same two belt setup you have, but I need some good pictures to go off to get me started on the fab work. Also, did the double pulley you made work out? What did you use? Thanks. Share this post Link to post Share on other sites
312Hydro 474 #8 Posted May 21, 2016 (edited) Looks like he welded two pulleys together. Edited May 21, 2016 by 312Hydro Share this post Link to post Share on other sites
Jessica 0 #9 Posted May 30, 2021 On 8/21/2015 at 4:18 AM, tugbert1 said: Ok Here it is. Did not get any replies with info on the original pulley availability and / or photos of one so I made this rig. Will see how it works this weekend Have one for sale or know where to get one? Share this post Link to post Share on other sites
