need a new starter

[sangerz1 0]

My original starter has burnt out and I am wondering where I get can get a cheap working starter generator

[slammer302 2,155]

They are rebuild able most the time Sent from my XT1080 using Tapatalk

[sangerz1 0]

I'm just looking to get a new one

 

[pfrederi 17,729]

New will be very $$$$ find a Starter /Generator place near you and take it there.  (That will be expensive enough usually 100-150 depending on what is needed)

[stevasaurus 22,717]

sangerz1...first...Welcome to Red Square.  When you say you are looking to get a "cheap working starter generator"...nobody would take that to mean you are looking for a new one.   Maybe you would like to tell us what engine and maybe the model of the horse you have...there is more then one kind of starter generator out there.  Let me guess...you have a 7 or 8 hsp Kohler with a starter generator and you want a new one.  Here is a link to a company in Minnesota that is pretty good.  If you have a Wheel Horse with a 7 or 8 hsp kohler...make sure they verify that it is a Clock-Wise rotation.    Counter Clock-wise Rotations work on Cub Cadets.  You did not say if you had a Wheel Horse either. 
http://www.psep.biz/store/kohler_engines_model_k181_(8hp)_starter_motors_page_1.htm#AHGDR0001

 

[Lane Ranger 10,968]

I just took the old starter generator from my 1961  Wheel Horse 701 for a rebuild!  The starter/generator is a big old Delco with the double pulley for the 701 two belt  setup.    A shop near me rebuilds the Starter/generator for $85  to $150 on average.  Not sure if I only needed new brushes and/or bearings but I know this shop does it right.   It will be "like new"  when completed !    I would hate to think what a really new Delco starter/generatgor sitting on some shelf somewhere would cost but I am sure it is more than I have paid for many of my tractors !  

Ask around your area Sangerz1  and I am sure you will have an auto electric shop that rebuilds these Delco starter/generators which were built to last !
 

[sangerz1 0]

I have a ten horse k241 Kohler and a t1056 wheel horse, the engine is a clockwise rotation

[rjg854 11,360]

I just got a starter/generator rebuilt, which included a new voltage regulator, for under $130. It goes on a Commando 8hp.  While looking on the net, a starter/generator would have been @‌ $160 alone.

[AMC RULES 37,130]

 Just PM'd you a link.

[squonk 41,071]

I just got a starter/generator rebuilt, which included a new voltage regulator, for under $130. It goes on a Commando 8hp.  While looking on the net, a starter/generator would have been @‌ $160 alone.

Randy, Did you get it done at Witmer's? You wouldn't know it by looking at him but Jeff has a bunch of Wheel Horses

[sangerz1 0]

 Just PM'd you a link.

i looked at this and that is really cheap but I live in ohio

 

[rjg854 11,360]

I just got a starter/generator rebuilt, which included a new voltage regulator, for under $130. It goes on a Commando 8hp.  While looking on the net, a starter/generator would have been @‌ $160 alone.

Randy, Did you get it done at Witmer's? You wouldn't know it by looking at him but Jeff has a bunch of Wheel Horses

yes I did