Pacific Dog 1 #1 Posted November 15, 2008 Hello All, A trip to the SF Bay area took me by a Tractor Supply store so I HAD to buy the muffler for a stack on a 314-H. Thought I would practice my documenting skills while I was at it for your entertainment. 1. Disconnect sparkplug. 2. Unmount PTO rod, carburetor, governor linkage and air baffle. 3. Remove muffler. 4. Loosen muffler locknut and remove muffler elbow. 5. Cut and trim muffler intake to fit 3" steel nipple. Use muffler clamp to form over nipple. 6. Weld muffler and nipple for mounting and strengthening. 7. Assemble 45 Share this post Link to post Share on other sites
BairleaFarm 340 #2 Posted November 15, 2008 Great little write up and Great Pics. Thanks for posting Share this post Link to post Share on other sites
KyBlue 655 #3 Posted November 15, 2008 Nice Post...great job on the documenting everything, and im really diggin the support your provided, I think I would have cut the pipe coming off the muffler a bit shorter thou.. Looks off balance to me (too tall ) Share this post Link to post Share on other sites
sorekiwi 761 #4 Posted November 15, 2008 I think I would have cut the pipe coming off the muffler a bit shorter thou.. Looks off balance to me (too tall ) You want it high enough so its not blowing exhaust gas out right at head (face) height... Share this post Link to post Share on other sites
Stigian 1,234 #5 Posted November 15, 2008 Nice stack and nice write-up Dan When i put a stack on my 312-8 it made the little tractor feel even more tractor like, has you stack had the same effect? :D Share this post Link to post Share on other sites
