Michael Bullington 5 #1 Posted November 14, 2008 Hey tecumseh fans, I need some help...a friend is seating the valves in my H-60 friday night and I need to know what the lash is set at? :D Share this post Link to post Share on other sites
Michael Bullington 5 #2 Posted November 15, 2008 ....we set mine at five thousands by the guage...I not sure what the book calls for but this should work...I found my exhaust valve was not seating properly...after seating it in ,,we had to file the valve a bit to get it to seat in properly... Thought about adding heavy duty valve springs, polishing the ports and milling the deck down . .to see If can get into that tecumseh unlimited RPM club :hide: Share this post Link to post Share on other sites
saguaro 0 #3 Posted November 15, 2008 I found nothing on valve lash in the manual. But it does show valve clearance of .008 .012 Dont know if that help. Share this post Link to post Share on other sites
Michael Bullington 5 #4 Posted November 15, 2008 thats what i was look for thanks for the information,...Im not to far off,,,maybe Ill pull them out and file some more.... :hide: Share this post Link to post Share on other sites
saguaro 0 #5 Posted November 15, 2008 It says the valves are not interchangable and are marked I or X. Share this post Link to post Share on other sites
