Dad&Kev 31 #1 Posted June 14, 2015 I need help with the wright drive belt size for our 75 c160. I changed the original belt last fall after it broke at a pull and I put a 5/8 x 79 drive belt from sanels in it . that belt do not want to slip so it sqeals and smokes and grabs like a race car clutch . I also had to adjust pedal to get it back up high enough . so I think I got the wrong belt .I so would appreciate any help I am trying to get it ready for big show. Thanks Dave and kevin Share this post Link to post Share on other sites
Wishin4a416 2,191 #2 Posted June 14, 2015 7473 I believe but don't know the length. They are on ebay. 1 Share this post Link to post Share on other sites
WNYPCRepair 1,923 #3 Posted June 14, 2015 (edited) Maybe this will help Edited June 14, 2015 by WNYPCRepair 1 Share this post Link to post Share on other sites
daveoman1966 3,766 #4 Posted June 14, 2015 1975 C-160 Auto takes belt # 7478 at 84" . The 8-speed manual takes belt # 7473 at 82". Thats per the Toro website.I have several of the GOOD USED belts in my shop. They aren't stretched or slashed, cut or chunks out of them..For more details if you want to buy one of mine, send me a direct emails....clik here:daveoman@windstream.net 1 Share this post Link to post Share on other sites
squonk 41,774 #5 Posted June 14, 2015 Napa 5L820W I have run that belt on my 76 for 5 years with no issues 1 Share this post Link to post Share on other sites
Dad&Kev 31 #6 Posted June 15, 2015 thanks guys for all the help I was able to pick up a 5/8x82 Kevlar belt at tractor supply today and put it in and that worked great. So ounce again we appreciate the help Share this post Link to post Share on other sites
