GT-14 towing

[ericampagna 3]

I have a gt-14 that is currently stuck in the field.  I'd like to tow it back to the barn but I can't seem to find the tow valve. I have looked where the decal says it should be. ( see picture) but my hydrostatic doesn't look like that. The hydro says it's a sundstand 90-1136. It seems like this hydro is not original to this wheel horse. ( I could be wrong)  does anyone know where the tow valve is on this transmission and if it is original to the gt-14

[Brrly1 1,146]

Does it have a valve with a rolled pin? If it does the longest part of the pin needs to point toward the rear.

[ericampagna 3]

I don't see anything.  

[ericampagna 3]

Anyone know if this is the original pump or if it has been replaced? 

[ericj 1,578]

so a bigger overview picture that may help. i had a C120 that just shut down one time when plowing 2 houses down the road with ag tires and wheel weights so i had a neighbor pull me back up the road with both rear tires locked up on black top because i have never been able to get my valve loose even to this day. luckily it never seemed to hurt my tractor. i know that 4 wheeler had all he could do to pull me up the road though. if you are in grass or dirt while i don't highly recommend it all the time i would probably just drag it slowly back to were i could work on it. good luck




eric j  

[oldredrider 2,548]

That model should have a slot or square head bolt on the left hand side of the transmission facing forward. Turn that valve counterclockwise one or two turns to release. I would not drag a tractor...put the wheels on a dollie if you  can't move the valve.

[fast88pu 3,324]

If you have a bigger tractor with a FEL lift it and carry it out of the field with it.

[Shuboxlover 478]

The third picture tells you what you need to know...

[shallowwatersailor 3,213]

Probably won't help now, but here is what you can do in the future. I've moved a few of my tractors this way. Much better than the first time I moved a tractor with a Hi-Lift Farm Jack two feet at a time!

[ericampagna 3]

Thanks everyone I found the tow valve but it was very stuck. Fortunately I got my starter replaced while sitting in the field so I was able to drive it back to the barn.  I'll have to work on getting the tow valve to turn in case k break down again.