Vinylguy 4,674 #1 Posted May 11, 2015 I am confused a bit about this dash. Never seen one with the switch on the left side. Were they all left hand or did they make them both ways Also could use some help with the validation of the dimensions shown in this image. Thanks in advance for any help. Share this post Link to post Share on other sites
shallowwatersailor 3,213 #2 Posted May 11, 2015 My '89 had the key on the left. The '88 may have as well. These had the motion lever that had a crooked gate between the legs so it may have been a design to have less interference while operating. In '90 they went to the column for the motion lever and my '90 was back on the right. Strangely though, my '86 312A and '81 C-145 have the key on the right and the motion lever between the legs but the gate is straight. 1 Share this post Link to post Share on other sites
Vinylguy 4,674 #3 Posted May 11, 2015 Makes perfect sense John. Thanks, now if I can get accurate dimensions I can update the file. parts tree image shows the ignition on the right which threw me off. Share this post Link to post Share on other sites
