Muel 20 #1 Posted April 22, 2015 I just finished the first mow of the year after the spring tune up. When I tried to pull it in to the garage it wouldnt engage the gear. The shifter felt very loose and pulled straight up and out. Im assuming there is a retainer screw or something that came out. My question is: Will I have to pull the tranny out and split the case to fix this? Share this post Link to post Share on other sites
stevasaurus 22,883 #2 Posted April 22, 2015 Click on this link...it should explain the whole thing. It seems like we have had a few of these happen lately. Let us know if this helps you. 2 Share this post Link to post Share on other sites
Muel 20 #3 Posted April 22, 2015 Thanks Stevasaurus!! I will check it out. 1 Share this post Link to post Share on other sites
Muel 20 #4 Posted April 23, 2015 (edited) That was a huge help. A much easier fix than I feared. However my set screw was destroyed and I need a replacement. Are these still available or do I need to make my own? Edited April 23, 2015 by Muel Share this post Link to post Share on other sites
Racinbob 11,251 #5 Posted April 23, 2015 Sam, PM me your address and I'll send you one. 2 Share this post Link to post Share on other sites
stevasaurus 22,883 #7 Posted April 24, 2015 Sam, Bob beat me to it. They are available from McMasterCarr. I think it is about $5 for 25 of them. Share this post Link to post Share on other sites
Racinbob 11,251 #8 Posted April 24, 2015 I didn't know that Steve. I see they have all sorts of them including stainless. I also see that WW Grainger has them. An old Wheel Horse bag of them made the trip when we moved down here and I'm sure I'll never use all of them so I dropped one in the mail to Sam this morning. 1 Share this post Link to post Share on other sites
stevasaurus 22,883 #9 Posted April 24, 2015 Right Bob...thanks to DClark and Martin...I have a handful now, and I don't mind sending one to someone now and then...but if you have a bag of them...Holy Set Screw Bat Man!!! Share this post Link to post Share on other sites
Muel 20 #10 Posted April 30, 2015 Thanks again Bob! Im back in action. 1 Share this post Link to post Share on other sites
Racinbob 11,251 #11 Posted April 30, 2015 You're quite welcome Sam. 1 Share this post Link to post Share on other sites
