Save Old Iron 1,566 #1 Posted April 16, 2015 (edited) at first I thought - well ........ sandals, pick axe , hair and belt drives, 60 volts dc , undersize wiring and battery acid there's just way too much in the way of safety advice not to pass this on (I know its 12 minutes of your life you will not get back but you have to watch the full video to benefit from the wisdom contained there in). Edited April 16, 2015 by Save Old Iron 4 Share this post Link to post Share on other sites
meadowfield 2,571 #2 Posted April 16, 2015 I like his method of switching the power on - pretty clueless about the electric part!!! he doesn't know all the cell sizes need to be matched.... Share this post Link to post Share on other sites
stevebo-(Moderator) 8,333 #3 Posted April 16, 2015 All I can say is OMG !!! 1 Share this post Link to post Share on other sites
meadowfield 2,571 #4 Posted April 16, 2015 his apparent calmness to a blown up battery! my brother once shorted a truck battery whilst tightening the terminal... the battery exploded in nanoseconds, covering him in acid and the plastic put a large gash in his chin Share this post Link to post Share on other sites
Save Old Iron 1,566 #5 Posted April 16, 2015 (edited) his apparent calmness to a blown up battery! and not missing a beat in suggesting the exploded cell in the battery can be ignored, and the battery used as a "10 volt battery" Dunning Kruger meets Darwin !!! Edited April 16, 2015 by Save Old Iron Share this post Link to post Share on other sites
KC9KAS 4,741 #6 Posted April 16, 2015 After seeing his yard and storage, I can see he he isn't worried about safety. ..or anything else. 1 Share this post Link to post Share on other sites
Racinbob 11,115 #7 Posted April 16, 2015 I just watched that while sitting here eating my breakfast. I'm confused. I can't figure out if I started my day off with a good laugh or if I'm in a state of shock. 3 Share this post Link to post Share on other sites
Racinbob 11,115 #8 Posted April 16, 2015 OH WOW!!! I just noticed that he calls himself Rinoa Super Genius. Better yet, that was part 11. Now we can all watch parts 1-10. There will be a test guys. Remember, quality education is priceless. 1 Share this post Link to post Share on other sites
Coadster32 793 #9 Posted April 16, 2015 This guy is a piece of work for sure!! Share this post Link to post Share on other sites
squonk 41,171 #10 Posted April 16, 2015 Charging those little batteries at 15 amps for 2 hrs! Share this post Link to post Share on other sites
chazm 413 #11 Posted April 16, 2015 be afraid ....BE VERY AFRAID !!!!! Share this post Link to post Share on other sites
jimt1971 237 #12 Posted April 16, 2015 "Guess now I have 48 volts!" Share this post Link to post Share on other sites
buckrancher 2,679 #13 Posted April 16, 2015 I thought the best part was watching him use a pick with open toed sandals on (dumb azz) Brian Share this post Link to post Share on other sites
JC 1965 1,530 #14 Posted April 16, 2015 Several accidents waiting to happen. Thanks for sharing Chuck. 1 Share this post Link to post Share on other sites
bmsgaffer 2,045 #15 Posted April 16, 2015 holy cow. <- Me while watching this. Hes so young! Ill give him credit, that's innovative for knowing NOTHING of electricity and safety (and probably the $0 budget). But this is a bit (incredibly) scary. Share this post Link to post Share on other sites
C-101plowerpower 1,605 #16 Posted April 16, 2015 hm interesting, gotta watch out for the reverse charging, before you know it you'll be starting your horse in the wrong direction Share this post Link to post Share on other sites
Racinbob 11,115 #17 Posted April 16, 2015 Oh that's silly Koen. Then you'd have 6 reverse gears and only 2 forward. Share this post Link to post Share on other sites
shallowwatersailor 3,213 #18 Posted April 16, 2015 One thing for sure - luckily he is not my neighbor! 1 Share this post Link to post Share on other sites
Save Old Iron 1,566 #19 Posted April 16, 2015 (edited) this video also provides insight into the age old question you may ask when viewing a Craigslist advert for a rolling chassis. "I wonder why the previous owner cut a square hole in the hood? Oh look, he also left a 10 inch C clamp under the seat!" Edited April 16, 2015 by Save Old Iron Share this post Link to post Share on other sites
Save Old Iron 1,566 #20 Posted April 16, 2015 (edited) OH WOW!!! I just noticed that he calls himself Rinoa Super Genius. Better yet, that was part 11. Now we can all watch parts 1-10. There will be a test guys. Remember, quality education is priceless. In the spirit of https://www.youtube.com/watch?v=popXDFvOsLg I have learned a new technique for drilling holes in sheet metal (6 minutes40 sec) into Edited April 16, 2015 by Save Old Iron 1 Share this post Link to post Share on other sites
Coadster32 793 #21 Posted April 16, 2015 That is a new method of adding a hole. Share this post Link to post Share on other sites
Racinbob 11,115 #22 Posted April 16, 2015 You did it, didn't you SOI. You watched all 11 parts. My advice would be to just sit down in your favorite chair and just try to relax and think about cute little bunnies. Understand that a full recovery may not be possible at this point. Share this post Link to post Share on other sites
Save Old Iron 1,566 #23 Posted April 16, 2015 Yes. Yes I did. 3 hours and 50 lbs of /16th 6013 rod later..... what has been seen cannot be unseen. The homemade contactor switch made from the 2x10, door hinge and Kmart flat blade screwdriver is - forgive the pun - burned into my brain. 4 Share this post Link to post Share on other sites
C-101plowerpower 1,605 #24 Posted April 17, 2015 i thought that he would use his "welder" to burn a hole in it and use that Share this post Link to post Share on other sites
Save Old Iron 1,566 #25 Posted April 17, 2015 (edited) I now have developed a full blown fascination with his YouTube website. Don't get me wrong - I do see a level of talent here, but I'm looking for the the word describes what is lacking. I think I found out what is missing. Look what sneaks into the video at 8 minutes 30. My appetite today has been satisfied by the effort put forth to fix a power supply he blew up. I suspect he hooked up his laptop battery in reverse and blew out the protection diode across the output of the power supply. the word I'm looking for is FINESSE. And of course Thumper's safety tip of the day Edited April 17, 2015 by Save Old Iron Share this post Link to post Share on other sites
