Restore 1995 520H

[608KEB 796]

I'm going to restore the 95 520H I bought yesterday. This is probably going to take a while. The 9 pin connector needs to be repaired first

Edited March 20, 2015 by 608KEB

[608KEB 796]

I patched the nine pin connector. The battery is now charging. I have a 520H wiring diagram. I don't know where to start looking for the problem with the warning lights. They stay on while the tractor is running. Is it a relay switch problem?

Edited March 21, 2015 by 608KEB

[cleat 6,695]

All the lights ?

[608KEB 796]

Yes, all the warning lights stay on. The oil pressure light flashes, which I think is normal. I noticed the transmission warning light wire plug is broken off. That shouldn't matter.

Edited March 22, 2015 by 608KEB

[varosd 1,185]

you even got a bonus   the free rear axle bracket

[608KEB 796]

Yes, It also came with a 48" plow. The headlights and other gauges all work.

[cleat 6,695]

Don't know what to tell you about the indicator lights. Early models have a test switch that you depress to test the lights. Later models just cycle the lights on for a couple of seconds when you turn on the ignition switch.

 

I have never seen a rear bracket spaced down like yours before.

 

Cleat