What a difference 6 months makes
By
Hodge71, in Wheel Horse Tractors
-
Similar Content
-
By Hardy6
Hi I recently got an old charger 12 that had been sitting in a friends backyard for at least 20 years. The engine spins over and the starter works but it has no spark, I’ve been looking online for some solutions but I can’t seem to find any other charger 12s with my ignition setup. It seems to have a sort CDI box but I’m not sure. Does anybody know how this works or any tips on how to test for where the problem is ?
-
By BrianKoch
Hello gentleman,
Problem: will not crank on its own, will crank with jump box—but still not fire
Recent things I did prior to this issue: cleaned fuel filter, replaced battery cables, replaced cable from ignition to starter
I have my test light out and am probing around.
There is no power at ignition/magneto wire or the ignition/starter wire
There is power everywhere else
-
By 12 hp Kohler
Picked up a charger 12 at auction yesterday. Put a battery, new fuel lines and a new spark pug in and it fired right up. Hydro seems to work pretty well, lever needs some adjustments but other wise it seems okay. I would like to put fresh transmission fluid in and a new filter on yet and then it should be good to go. I'm gonna start using this for plowing instead of my 753, i tried it out today and it seemed to work pretty well. The paint on the fenders and hood is a little off but it wont be hard to fix that.
-
By RJ Hamner
We brought my next project home last night. I think I am going to need a BIGGER shed real soon
-
By RJ Hamner
It acts like the lever has limited travel and doesn't go far enough to go into reverse. Something binding? Bent?
The tractor showed signs that it had a rollover sometime in its life. Right front axle was welded along with some of the steering parts.
I have a 68 charger (for parts) and swapped out the repaired parts with it.
Possibily bent something there or the friction assy?????
-