Bert 760 #1 Posted December 6, 2014 Picked this up about 1 min up the road, it was on a troy bilt tiller with electric start and a complete charging system. It runs great! I didn't realize it was cast iron till I got it home and noticed rust by the exhaust, so I got a magnet and it stuck to the block. Ive heard they were out there but had never seen one I think this will be a nice repower for the work horse 700 or the 653, can't decide which yet though I like the idea of stock apearance with some extra weight and durability. 3 Share this post Link to post Share on other sites
JERSEYHAWG / Glenn 4,497 #2 Posted December 7, 2014 Let me know if you find a H60 up the road to. Lol thats what I am hunting down for a 500 special.............. Glenn 2 Share this post Link to post Share on other sites
Geno 1,929 #3 Posted December 7, 2014 Very, very nice score Bert. I have one on my 657. I can take better pics of the decal on the engine if you like or this pic blows up pretty big. The decal had a big "XL" on it with "Extra Life" under it then "Cast Iron" under that. 1 Share this post Link to post Share on other sites
Bert 760 #4 Posted December 7, 2014 Very, very nice score Bert. I have one on my 657. I can take better pics of the decal on the engine if you like or this pic blows up pretty big. The decal had a big "XL" on it with "Extra Life" under it then "Cast Iron" under that. Yes Id like to get some close up pics if you wouldn't mind? It looks like the same decal thats on my HH100. Also would like to see the carb and cable setup. This one is a lil different then the wheel horse setup and i was wondering if id need to trade from my tired work horse 700 engine? Thanks 1 Share this post Link to post Share on other sites
Geno 1,929 #5 Posted December 7, 2014 I can get you some Monday AM if thats ok. Share this post Link to post Share on other sites
Bert 760 #6 Posted December 7, 2014 I can get you some Monday AM if thats ok. Sounds great Thanks Share this post Link to post Share on other sites
pfrederi 17,643 #7 Posted December 8, 2014 The standard motor for Troy Bilt tillers in the days prior to being bought out used HH series (Cast Iron) Techumsehs, they had an optional 7 hp Kohler. Share this post Link to post Share on other sites
SousaKerry 501 #8 Posted December 8, 2014 My 67 Lawn Ranger had a HH60 block from a troy built when I first rebuilt it. About the only difference is the blower housing is a bit more square and of coarse those two ugly bolt holes in the front for the front mount tank. The throttle assembly is a bit different as well but I had an orriginal to put on it. I pulled the motor because it smoked badly and I was tired of fixing the dang thing. I started to rebuild a Kohler K181 for it but never finished it. Share this post Link to post Share on other sites
Geno 1,929 #9 Posted December 8, 2014 Hope these are good enough, I cant get the hood up all the way as it is buried in the back of a row. I can plan to get it out if you need more pics. You can click on them to enlarge them. 1 Share this post Link to post Share on other sites
Bert 760 #10 Posted December 9, 2014 So I guess I will be trading some parts from my tired h70. Thanks for the pics Geno, that decal looks like the one on my HH100. I wonder if they are still available? 1 Share this post Link to post Share on other sites
Geno 1,929 #11 Posted December 9, 2014 I don't know. Maybe Terry can make one from a good Hi-res pic like he does some other stuff, I'm not sure though. Wouldn't hurt to ask. Does your decal look better than mine? Share this post Link to post Share on other sites
Bert 760 #12 Posted December 9, 2014 The standard motor for Troy Bilt tillers in the days prior to being bought out used HH series (Cast Iron) Techumsehs, they had an optional 7 hp Kohler. good to know My 67 Lawn Ranger had a HH60 block from a troy built when I first rebuilt it. About the only difference is the blower housing is a bit more square and of coarse those two ugly bolt holes in the front for the front mount tank. The throttle assembly is a bit different as well but I had an orriginal to put on it. I pulled the motor because it smoked badly and I was tired of fixing the dang thing. I started to rebuild a Kohler K181 for it but never finished it. Ive had my HH100 and H60 for years and haven't had to fix the dang things , hope this HH60 serves me well to. Share this post Link to post Share on other sites
Bert 760 #13 Posted December 9, 2014 I don't know. Maybe Terry can make one from a good Hi-res pic like he does some other stuff, I'm not sure though. Wouldn't hurt to ask. Does your decal look better than mine? I may have to ask him bout it. Yours is much better than mine, not much left and it was on the fuel tank not the blower housing. Share this post Link to post Share on other sites
Geno 1,929 #14 Posted December 9, 2014 If you get it worked out with Terry let me know or ask Terry to let me know and I'll send him a Hi-res pic of mine. Share this post Link to post Share on other sites
sorekiwi 761 #15 Posted December 9, 2014 I have never been up close to an H70, but a few years ago I took some shots comparing an HH60 to an H60. One thing I liked about the HH60 was the bearing on the PTO end of the crank. Note that this H60 was an electric start motor with a fuel pump, the HH60 was a recoil start with no fuel pump. 2 Share this post Link to post Share on other sites
Bert 760 #16 Posted December 9, 2014 Geno, I'll talk to Terry about the decal after the holidays. I think I read someplace that he's busy this time of year and this is more of a want than a need. A pic of yours would be great, like I mentioned mine is in bad shape. Thanks for the offer. Sorekiwi, great pics, looks like most of the parts will interchange. 1 Share this post Link to post Share on other sites
pfrederi 17,643 #17 Posted December 9, 2014 This summarizes the differences. Valves could interchange, same size just different materials 2 Share this post Link to post Share on other sites
Bert 760 #18 Posted December 10, 2014 Pfrederi, great page thanks for info. Share this post Link to post Share on other sites
Retired Wrencher 5,440 #19 Posted December 14, 2014 Very, very nice score Bert. I have one on my 657. I can take better pics of the decal on the engine if you like or this pic blows up pretty big. The decal had a big "XL" on it with "Extra Life" under it then "Cast Iron" under that. Geno the XL like this see the original underneath is not the original engine it should have the balloon emblem. That would be a HH60 engine. Share this post Link to post Share on other sites
AMC RULES 37,126 #20 Posted December 14, 2014 (edited) My '63's original tin decals...these have recently been repopped, have the link if interested. Edited December 14, 2014 by AMC RULES 2 Share this post Link to post Share on other sites
Bert 760 #21 Posted December 14, 2014 Thats neat, Ive never saw one like that. Share this post Link to post Share on other sites
Terry M-(Moderator) 2,175 #22 Posted December 14, 2014 There's still a few Cast Iron Tecumsehs out there. Been picking them up for parts and projects...all of them are HH60's. perfect size for my little tractors 1 Share this post Link to post Share on other sites
Bert 760 #23 Posted December 14, 2014 There's still a few Cast Iron Tecumsehs out there. Been picking them up for parts and projects...all of them are HH60's. perfect size for my little tractors I always keep a lookout for them to, against popular opinion I like them and have had great luck with mine 2 Share this post Link to post Share on other sites
Retired Wrencher 5,440 #24 Posted December 14, 2014 My '63's original tin decals...these have recently been repopped, have the link if interested. sweet looking Craig Share this post Link to post Share on other sites
Bert 760 #25 Posted December 14, 2014 My '63's original tin decals...these have recently been repopped, have the link if interested. repopped? not sure what you mean but Id like the link to see. thanks Share this post Link to post Share on other sites
