rollingflat 123 #1 Posted November 4, 2014 Picked up an almost new brinly rear grader blade sun afternoon. Its 38" wide, and am thinking of making it up as a mid mount blade and also still be able to mount on back aswell. What do you guys think? 2 Share this post Link to post Share on other sites
Molon_Labe 731 #2 Posted November 4, 2014 Nice find, gotta' get one of those myself. Share this post Link to post Share on other sites
Geno 1,929 #3 Posted November 4, 2014 They are really nice, I have one myself. They also have an attachment that goes on the front of the box for that one with ground breakers on it. Share this post Link to post Share on other sites
rollingflat 123 #4 Posted November 4, 2014 Have been wanting a midmount blade for awhile and think this will be perfect with a little modification. Share this post Link to post Share on other sites
Geno 1,929 #5 Posted November 4, 2014 It is several inches taller than the mid mount grader blade. You may check clearances first before you start. Share this post Link to post Share on other sites
rollingflat 123 #6 Posted November 4, 2014 we'll do. will probably mock it up under the c-160 and see how it looks. Im thinking of removing sleeve hitch mount and top handle, then welding angle bracing and cross bar to fit in mid tach a matic. then it would fit both mid and aft mounts. But this is just first thoughts! then fab a ajustment arm much like that on the 50" mid mount blades. Share this post Link to post Share on other sites
AMC RULES 37,141 #7 Posted November 4, 2014 Well? I guess... as long as it can always go back to it's original configuration. Share this post Link to post Share on other sites
