rustykan 140 #1 Posted October 14, 2014 Anyone have a part number for the rubber bumper that was used for the back of the hinged seat pan on a 1976 C-120? My parts manual is for a 1975 and it does not show that particular configuration. Thanks in advance. Share this post Link to post Share on other sites
GlenPettit 1,717 #2 Posted October 14, 2014 (edited) Your manuals are a free download here on Red Square, under Manuals (under the WH logo horse, upper left corner): http://www.wheelhorseforum.com/files/category/9-1973-1977/?sort_order=ASC&sort_key=file_name&num=10&filter_key=all&st=140 Edited October 14, 2014 by GlenPettit Share this post Link to post Share on other sites
rustykan 140 #3 Posted October 15, 2014 Your manuals are a free download here on Red Square, under Manuals (under the WH logo horse, upper left corner): http://www.wheelhorseforum.com/files/category/9-1973-1977/?sort_order=ASC&sort_key=file_name&num=10&filter_key=all&st=140 There is no parts manual there for the 1976 C-120. That is where I found the 1975 parts manual that I have now. Share this post Link to post Share on other sites
Don1977 604 #4 Posted October 15, 2014 103887 rubber bumper I found it on the 1977 parts list. 1 Share this post Link to post Share on other sites
varosd 1,185 #5 Posted October 15, 2014 my 77 B-80 has a simple rubber press in doo hickey. after all those years, they was smushed down to pancakes. I replaced them with the round rubber with the spring style. much better. I did have to open up the holes on the flip up seat bracket. Share this post Link to post Share on other sites
Trouty56 567 #6 Posted October 16, 2014 I got some a few years ago at mouse technology or something like that.....I sure I saw it on a thread here somewhere.... Share this post Link to post Share on other sites
Trouty56 567 #7 Posted October 16, 2014 (edited) Mouser Electronics....if they are the flat dome style bumpers......Mouser part# 836-G2043......40 cents each link to post in RS....... link to product.....http://www.mouser.com/ProductDetail/Heyco/G2043/?qs=%2fha2pyFadugH1h2eJva1E6%252bKsxGGQbX60gkm9B%252byPLc%3d Link to catalog sheet.....http://www.mouser.com/catalog/catalogusd/647/2956.pdf If you look on the catalog sheet the part is second from the bottom in the top group....looks like figure C on the right side..... Maybe these are the wrong bumpers but maybe someone may find this useful information..... Edit....After rereading this post.... the OP was referring to the seat not the fender pan.....these are for the flip up pans and under the hood stands.....maybe late 60's to 74-75 or so.... Edited October 16, 2014 by Trouty56 Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,133 #8 Posted October 16, 2014 Here are some parts lists for the 1976 C-Series 8-speeds 1976 C-120 Auto In 1976 there were 4 model numbers for each model name and 3 different manuals for each model name. These manuals are shared so the same item may have more than one part number. When that happens they fail to tell us what model uses what in most cases. Garry Share this post Link to post Share on other sites
.thumb.jpg.08e05c7c9fdbe24021fc286c2094cf8e.jpg)