C195 -520 Reduction Steering

[edwroy 138]

Okay I have a C195 and have added an Ark550 Loader. Obviously turn it is a challenge with the gears slipping. I have been buying parts along the way and now have the 520H reduction steering system everything but the sweep axle. Here is my question - do I need the sweep axle or will everything fit on the stock axle.

Appreciate thoughts.

 

Edwroy

 

[stevebo-(Moderator) 8,363]

You need the swept axle and steering shaft/gear too. 

[Horse Fanatic 49]

I added reduction steering to my C195 but kept the original front axle.  I used the 520 spindles and rims with the stock axle. With the forward swept axle, my front tires would contact the bucket when down.  

Edited October 18, 2014 by Horse Fanatic