Bobie01 22 #1 Posted October 4, 2014 Hello after the swap from a KT17 to a K301in my C165, the choke cable on the throttle cable are to short. But where can I find where can I find just the cable without lever?In a lawnmower shop or at an industry specialist? Where did you buy things like this? Share this post Link to post Share on other sites
Sparky-(Admin) 21,541 #2 Posted October 4, 2014 Wonder if ya could just buy a couple of these and just cut them to length , cheap enough. They make a small tool that puts the "z" crimp in the ends. http://www.homedepot.com/p/Power-Care-48-in-Throttle-Control-H-SL-305/100182679 Mike.......... 1 Share this post Link to post Share on other sites
Desko 610 #3 Posted October 4, 2014 Tractor supply, lowes, or sears but to get OEM id go to partstree Share this post Link to post Share on other sites
Bobie01 22 #4 Posted October 5, 2014 I ask to mower and tractor dealers they don t have cables. the industrie parts services was closed on friday I have to try on monday Share this post Link to post Share on other sites
meadowfield 2,616 #5 Posted October 5, 2014 You can buy the whole thing with a lever here in the uk for £6 or €8 that how I got new cables. Share this post Link to post Share on other sites
Bobie01 22 #6 Posted October 5, 2014 oh an then you cutthe lever an fix them on the original lever? Share this post Link to post Share on other sites
meadowfield 2,616 #7 Posted October 5, 2014 That's it, throw the lever away. Mine were 1.5m long so needed cutting down. Share this post Link to post Share on other sites
Bobie01 22 #8 Posted October 5, 2014 ok I will check it on monday Share this post Link to post Share on other sites
daveoman1966 3,762 #9 Posted October 5, 2014 Don't pitch the OEM levers. Put the lever in a vise to hold it and just pry open the jaws that crimp the cable. 'Z' bend another longer cable and put it back in the same lever. You can 'crush' the jaws back to clamp the cable again. I've done this 50 times or more.... 1 Share this post Link to post Share on other sites
Bobie01 22 #10 Posted October 6, 2014 -i had phone to the local toro Dealer an ask if they had an Unisersal cable. Yes they have for a piece price of 4(!!!) euro!!!nice Share this post Link to post Share on other sites
Bobie01 22 #11 Posted October 13, 2014 I have mounted the gas cable on the engine. I bought the engine 1 year ago, but I think the speed controll(I dont know the English term) dont operate well. I don t think that it s broken because the previous owner had a broken axle. Does anybody know how to adjust it ? Share this post Link to post Share on other sites
Bobie01 22 #12 Posted October 15, 2014 I google it. is the governor which doesn t work well... any ideas? Share this post Link to post Share on other sites
