Racinbob 11,030 #26 Posted August 25, 2014 Ummmm........you're trusting your red machine to green restorers????? Braver than me Seriously though, mistakes happen. You gave them a chance to correct theirs and they responded with integrity. Share this post Link to post Share on other sites
RMCIII 838 #27 Posted August 27, 2014 Sounds to me like you may have found a shop that, if they do correct it, you will be taking more business their way. Rob Share this post Link to post Share on other sites
kudzu3 323 #28 Posted August 28, 2014 Got her back this AM, runs smooth and quiet. The noise was coming from an out of round crank. They attempted to get a smaller rod but said that the one needed was no longer available, so lapped the crank to the rod and that silenced the noises ( I can't afford a new crank). They also adjusted the governor and carb, all at no charge, however to show my appreciation I gave a generous tip. There will be very little touch up required, apparently they were very careful to leave as few scars as possible. I am completely satisfied. 5 Share this post Link to post Share on other sites
Geno 1,929 #29 Posted August 28, 2014 Very rare bunch that is, you better stick with them. Glad she's all fixed up. Is it pic time yet? Share this post Link to post Share on other sites
kudzu3 323 #30 Posted August 28, 2014 Pictures coming soon 1 Share this post Link to post Share on other sites
AMC RULES 37,125 #31 Posted August 28, 2014 Nice to hear they took care of you. Share this post Link to post Share on other sites
