Tim Bergfeld 55 #1 Posted August 23, 2014 Found this today what's it worth Sent from my iPhone using Tapatalk Sent from my iPhone using Tapatalk So that's all of them I will get the year tomorrow Sent from my iPhone using Tapatalk 1 Share this post Link to post Share on other sites
ericj 1,578 #2 Posted August 23, 2014 the deck ain't worth much hope it mows better then it looks how many hrs on the onan i'd say in the $ 300.00 to $500.00 range eric j 1 Share this post Link to post Share on other sites
AMC RULES 37,126 #3 Posted August 23, 2014 Looks like they used marzipan to make them patches. 2 Share this post Link to post Share on other sites
Molon_Labe 731 #4 Posted August 23, 2014 That's not a bad looking Horse but I had no idea that Dr. Frankenstein was a welder. 3 Share this post Link to post Share on other sites
boovuc 1,090 #5 Posted August 23, 2014 It has the motion control on the column so it is a 1991 or newer. Looking at the decals, it is probably a 1991 or 1992. No comment on value. Share this post Link to post Share on other sites
Ed Kennell 38,006 #6 Posted August 23, 2014 Must be some good paint holding those patches on the deck. That pigeon poop poured around the edges surely isn't holding anything. The tractor doesn't look bad, but the deck repair begs to question the quality of the tractor maintenance. I would think $300-$400 if the engine starts easy and runs strong with no smoke or surging, and the tranny is strong. 2 Share this post Link to post Share on other sites
Tim Bergfeld 55 #7 Posted November 5, 2014 Ok so it is mine now I love free stuff 1 Share this post Link to post Share on other sites
slammer302 2,155 #8 Posted November 5, 2014 Ive gotten some decks that looked worse than that and mowed nice and quiet one thing I've learned about these horses you can't judge a book buy its cover 2 Share this post Link to post Share on other sites
Sean Keys 57 #9 Posted November 5, 2014 Cant beat FREE!!! Share this post Link to post Share on other sites
Ken B 3,164 #11 Posted November 5, 2014 Ive gotten some decks that looked worse than that and mowed nice and quiet one thing I've learned about these horses you can't judge a book buy its cover Tim: You can't beat free! I have a 48 inch deck that has been welded MANY times. (The repairs do look much nicer than the one above) In fact I need to weld another patch on it today. I keep this deck going because it cuts so friggin nice and it is as quiet as a church mouse! One of the things I will be looking for at this yrs. BIG SHOW is either a nice 48 inch deck or a nice 60 inch deck... Share this post Link to post Share on other sites
RMCIII 838 #12 Posted November 5, 2014 Tim; You would be better off just giving that to me. It will be of no use to you and looks FAR TO BEAT UP, to be any good. I'll be by this weekend to take it off your hands. I'll even thow in $10.00 for finding it! Nice job Tim! Rob Share this post Link to post Share on other sites
Tim Bergfeld 55 #14 Posted November 5, 2014 Well the tractor is home and I am shocked the frankindeck works really well and is quiet here are some pics http://tapatalk.imageshack.com/v2/14/11/05/981294543ab136f9e1fa6aeede77e0db.jpg Share this post Link to post Share on other sites
RMCIII 838 #15 Posted November 5, 2014 Still under the beliefe you just need to not even waste your time with it and I'll be by over the weekend to get it! 1 Share this post Link to post Share on other sites
Tim Bergfeld 55 #16 Posted November 5, 2014 I need a tiller and a two stage blower for it heard the two stage blowers are really great Share this post Link to post Share on other sites
Trouty56 565 #17 Posted November 5, 2014 If you find those 2 attachments free then I give up..... 2 Share this post Link to post Share on other sites
Tim Bergfeld 55 #19 Posted November 5, 2014 I have an infiltration of grass in my hour meter but it still works Share this post Link to post Share on other sites
Tim Bergfeld 55 #20 Posted November 5, 2014 The seat on this thing felt loose so I checked it is tight but the rear one piece fenders rocks like it is loose anyone else see this am I in for a shock when I tear into this my 520 is tight so I know it is in just this unit Share this post Link to post Share on other sites
Bert 760 #21 Posted November 6, 2014 Wow thats a nice looking horse, the deck is kinda ugly but I've got a 42" rd that looked like scrap metal when I got it bout 8 years ago and it still cuts great. I wouldn't be concerned with an ugly deck as long as it doesn't flex. Then some proper reinforcements may be in order but regardless I like it. Share this post Link to post Share on other sites
Bert 760 #22 Posted November 6, 2014 Loose fender pan may be from the rear section of the tunnel being cracked or broke, theres been some good posts on repairing this. If thats the problem its an easy fix but would require welding. Share this post Link to post Share on other sites
Tim Bergfeld 55 #23 Posted November 6, 2014 Cool I have got a lot of welding time in on another mower so I feel pretty good now. I will tear into it tomorrow Share this post Link to post Share on other sites
Tim Bergfeld 55 #24 Posted November 6, 2014 Well that was a pretty uneventful easy fix under ten bucks and used a store credit I found in my wallet for that Share this post Link to post Share on other sites
Tim Bergfeld 55 #25 Posted November 6, 2014 (edited) This it the flat stock 1.5 inch by 1/8 inch welded on top of the frame of the work horse Used stainless steel screws Just for kicks I wanted to try and see just how tough the frankendeck was it had just rained last night grass was a foot tall and never mowed only bushhogged Like a champ that Onan is a beast Edited November 6, 2014 by Tim Bergfeld Share this post Link to post Share on other sites
