Shuboxlover 476 #1 Posted August 19, 2014 Long story short.... Was moving tractors around....520 was running perfect....parked it, went to start it 15 minutes later....NOTHING... I hear the relay under the dash clicking, but no start. I can jump across the two big posts on the solenoid and it fires right up. Where do I start???? Thanks Share this post Link to post Share on other sites
Desko 589 #2 Posted August 19, 2014 I'm just taking a guess but the fuses Share this post Link to post Share on other sites
oldredrider 2,548 #3 Posted August 19, 2014 Start with the safety switches and their connections. Check the PTO position. Share this post Link to post Share on other sites
Shuboxlover 476 #4 Posted August 19, 2014 Desko wins!!!! It was the fuse....I looked at them at first, it appeared to be good, but then I measured it and sure enough, it was open... Thanks!!! 1 Share this post Link to post Share on other sites
km3h 543 #5 Posted August 19, 2014 Now that's what I call an easy fix. Share this post Link to post Share on other sites