dirtymax006 1 #1 Posted August 12, 2014 I need to know the correct size drive belt and if anyone has a drive belt cover. Can anyone help? I also need the rod that has the swivels on both ends that makes the tractor steer. I have it all restored besides these three parts. Share this post Link to post Share on other sites
AMC RULES 37,134 #2 Posted August 12, 2014 (edited) 29" V belt...WH # 1569 In the second download here. http://www.wheelhorseforum.com/files/download/1074-tractor-1961-401-551-701-om-ipl-wiringpdf/ Edited August 12, 2014 by AMC RULES Share this post Link to post Share on other sites
dirtymax006 1 #3 Posted August 12, 2014 Mine has a 1/2"x34" v belt. Must be wrong size pulled?? What do you mean second download here? Share this post Link to post Share on other sites
AMC RULES 37,134 #4 Posted August 12, 2014 By clicking on the second download... you'll find a service manual/parts list for your tractor. Share this post Link to post Share on other sites
dirtymax006 1 #5 Posted August 12, 2014 Where is the second "download"? Share this post Link to post Share on other sites
AMC RULES 37,134 #6 Posted August 12, 2014 http://www.wheelhorseforum.com/files/download/1074-tractor-1961-401-551-701-om-ipl-wiringpdf/ Share this post Link to post Share on other sites
Racinbob 11,250 #7 Posted August 16, 2014 As far as your steering part you might be able to find a decent used one but those drag links wear a lot. You might be able to extend its life by peening it a bit more. It's probably easier just to make a new one using two easily available ball joints and rod. Share this post Link to post Share on other sites
Racinbob 11,250 #8 Posted August 16, 2014 The down side is if you're going for a 'factory' restore. Share this post Link to post Share on other sites
dirtymax006 1 #9 Posted August 17, 2014 It's just a tractor for my 6 1/2 year old son. It is very nice but not to worried about a factory restore. Share this post Link to post Share on other sites
dirtymax006 1 #10 Posted August 18, 2014 This is what it is. 1 Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,104 #11 Posted August 18, 2014 Nice looking tractor. Your drive belt appears to have raw rubber sides. If you have trouble with it not wanting to slip when the tension is removed (clutch pedal down) get a belt that is completely covered in fabric including the sides. Usually the belt guard needs to be installed also to support the slack belt so it can slip on the engine pulley. Garry Share this post Link to post Share on other sites
dirtymax006 1 #12 Posted August 18, 2014 I had one of the fabric ones and thought this would be better. But unfortunately it's not. Does anybody have a belt guard they would part with? Share this post Link to post Share on other sites
