Nick P. 20 #1 Posted July 28, 2014 Any hints on this; The 875 was running at 4-5 mph and I inadvertently pulled on and engaged the brake lever. Grrrrr, sound. Now the lever is not tight as it was before and I have to pull the brake lever up to re-engage the hydro drive pump. The hydro still pumps and drives the 875 if I temporarily hold the lever up. The lever wont stay in the "UP" = drive position. It just kind of wobbles around. Permanant damage? or hope it is just a spring or a lever than I munched. Any advice is appreciated. Thanks, Nick Share this post Link to post Share on other sites
sorekiwi 761 #2 Posted July 28, 2014 There is a spring on the lever, it sounds as though it has broken. A look at the parts drawing should show you where it is. If the parking brake doesnt work anymore, it has probably broken the pawl inside the transmission. It is reasonably common to find a tractor with this problem. A search for "Parking brake" should bring up pictures and repair options for this. Share this post Link to post Share on other sites
pfrederi 17,905 #3 Posted July 28, 2014 I would stop using it and change the hydro fluid and filter. That Grrr noise was the parking pawl being ground down by the gear it engages dumping metal shavings into your hydro system..... Share this post Link to post Share on other sites
Nick P. 20 #4 Posted July 31, 2014 Thanks both for the good advice. I will wrench around and remove the shroud covers this weekend and take a look. Crossing my fingers it is just an external spring(?) that gave up and not internal pawl. -Nick Share this post Link to post Share on other sites
Nick P. 20 #5 Posted August 2, 2014 Hi All, Happy to report- broken Spring was the culprit ! Anyone have a photo or diagram showing where the spring end attaches? The hole in the brake lever is one end, I am seeking to locate the opposite non brake end. Is it bolted to somewhere?? Nick Share this post Link to post Share on other sites
AMC RULES 37,134 #6 Posted August 2, 2014 There's a parts diagram for your tractor included in the second download here. http://www.wheelhorseforum.com/files/download/427-tractor-1965-875-1075-om-ipl-wiring-245-246pdf/ Share this post Link to post Share on other sites
Nick P. 20 #7 Posted August 3, 2014 Thanks all for the great advice. Next puzzle- how to change the mower deck drive belts. Any suggestions are welcome. It looks like the deck shaft has to come apart ? Share this post Link to post Share on other sites
