aaubrey96 0 #1 Posted July 14, 2014 This is my second wheel horse tractor that I picked up a couple of months ago for $100 and after i got it home and started messing with it I realized it wasn't driving like it should be. It had no power going forward so i checked the belt and it was bad so I put a new belt on it and now it has no power going forward but reverse seems fine, any suggestions or ideas? Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,104 #2 Posted July 15, 2014 Welcome to the form A bit here on the motion control friction Transmission service manual Changed the name of this last file Garry Share this post Link to post Share on other sites
aaubrey96 0 #3 Posted July 15, 2014 ok thanks i will check out those links Share this post Link to post Share on other sites
546cowboy 301 #4 Posted July 20, 2014 Are you sure you installed the belt correctly? I had one I put on the wrong side of the idler and it had no power. Share this post Link to post Share on other sites
