gallihugh885 0 #1 Posted June 28, 2014 I was working on pulling the hub on my D180and I was using the 6 bolt with the 1/2in plate puller I got the hub half way off and for whatever reason,you guessed it, it broke.I thought I had it made once I saw the hub move that far. So what I would like to know is if there is anyone out that might have one that I buy from them.It would be greatly appreciated you did Thanks Mark Share this post Link to post Share on other sites
gallihugh885 0 #2 Posted June 28, 2014 Sorry, this was the wrong place to post this I don`t know how to delete it Mark Share this post Link to post Share on other sites
pfrederi 17,905 #3 Posted June 28, 2014 When you go to pull a D series hub that is recalcitrant do not pull on the flange it will, as you have discovered, break. You have to pull on the back edge of the hub. D series hubs have very long bodies relative to the thickness of the flange. Share this post Link to post Share on other sites
