Sparky-(Admin) 21,369 #1 Posted September 27, 2008 Hey guys. I'm lookin at this oil temp gage on E-bay and want to know if you think its shot. It reads 250 degrees in the pic and its not hooked up. My gut tells me its busted. Let me know your thoughts. Mike...... http://cgi.ebay.com/WHEEL-HORSE-D-200-180-...id=p3286.c0.m14 Share this post Link to post Share on other sites
Kelly 1,029 #2 Posted September 27, 2008 I peged a few in my race cars and they are usally junk after that. I'd pass. Share this post Link to post Share on other sites
Kelly 1,029 #3 Posted September 27, 2008 But you know what, mine were mech. guages, is that one elct.? might go to 0 once powered, my truck guages don't zero when I turn the key off. Share this post Link to post Share on other sites
oldandred 15 #4 Posted September 27, 2008 I have a d160 and mine does that untill I power it up dont ask why thats the way mine works its also on D180 D200 dont knoiw about the 250s, Share this post Link to post Share on other sites
64s 83 #5 Posted September 27, 2008 Just ask if he will honor a return if it doesn't work and you'll notify him within 48 hours. If he feel confident in the guage, it shouldn't be a problem - if he says no then walk away. Good luck! :banghead: Share this post Link to post Share on other sites
Kelly 1,029 #6 Posted September 28, 2008 I've bought lots and lots of stuff from him, his name is Bill, very nice guy Share this post Link to post Share on other sites
linen beige 14 #7 Posted September 28, 2008 I've bought lots and lots of stuff from him, his name is Bill, very nice guy I've bought from him too. He is a nice guy. Share this post Link to post Share on other sites
