Wheel Horse Tubes and Tires

[whanna 0]

I need a tube for a my B-111 front tires. They are all dry rotted, and leaky. The tires are Carlisle Turf Saver 13x6.50-6 tires. Any suggestions, I am having a hard time finding a good match for them.

 

Thanks,

 

Liam

[Tankman 3,518]

I've always dealt with Miller Tire. Good pricing, fast delivery. Nice folks.

 

Take a peek-a-boo here:  http://www.millertire.com/categories/lawn-garden-tires/13x6-50-6/

 

 

[Tankman 3,518]

I've always dealt with Miller Tire. Good pricing, fast delivery. Nice folks.

 

Take a peek-a-boo here:  http://www.millertire.com/categories/lawn-garden-tires/13x6-50-6/

 

 

[whanna 0]

What valve stem style would I need?

[Racinbob 11,081]

With tubes I personally like the threaded type stem that stays into place even at low pressure. Either type will be fine though.

[JC 1965 1,530]

The threaded valve stem is the way to go.

[whanna 0]

Would that be the tr-87 or the tr-13?

[Racinbob 11,081]

I don't think either. I believe those are just metal stems but not held in place with nuts. Here's what I use. Tough to get a good shot but you get the idea. These won't push back in the tire if the pressure is low..

[Racinbob 11,081]

Found this. Like a TR-4 or TR-6. This doesn't show it but it's incorporated into the tube.

[Racinbob 11,081]

Here's a better pic.

[whanna 0]

I gotcha. The website I was looking on doesn't seem to have any with those stems. Is there a website or dealer you prefer?

[Racinbob 11,081]

I found mine on Ebay. They are made by Kenda but I'm sure there's many others too. They are a bit pricier than the 'normal' tubes but I think worth it. I paid about $20 each.

[ol550 830]

Be carefull putting tubes in those dri-rotted tires.  They try to get back out.