Electro12WH 50 #1 Posted May 23, 2014 My '68 Charger uses a lot of these thin brass bushings, They have a 1/2" bore and an 1" dia. rim. Their also used in places like the clutch linkage, the seat hinge and so on. Is there a ready source for these? Share this post Link to post Share on other sites
tarcoleo 119 #2 Posted May 23, 2014 (edited) I make them, drill out large 7/16" nuts and grind OD's. Don't think they're originally brass. Edited May 23, 2014 by tarcoleo Share this post Link to post Share on other sites
the_nite_owl 15 #3 Posted May 24, 2014 I just bought a bushing for the seat mount on my 76 D-160. I would have to try and measure it to see if it is the same and it is currently mounted making that difficult. Take a look at part 15-05 at this link. See if the part number cross references to your tractor. https://www.partstree.com/parts/?lc=toro_consumer&mn=61-16OS02%2C+D-160+Automatic+Tractor%2C+1976&dn=803999R2-99R20057-00031 Share this post Link to post Share on other sites
Electro12WH 50 #4 Posted May 25, 2014 Yes that's the part, thanks! Share this post Link to post Share on other sites
