mrc 841 #1 Posted May 22, 2014 hi men, if you follow this forum you may recall one of the differential bolts backed out of my 416-8 tranny last winter. extensive damage resulted. i recently crated that tranny and a spare and shipped them to racinfool40/mike. i used fastenal for shipping. round trip shipping from mass. to ohio and back was $125. mike just called me and said both are totally rebuilt. i really appreciate mike doing this! his prices were reasonable. he really knows his unidrives! i would encourage anyone who needs unidrive rebuilding to contact mike. best regards mike in mass. 8 Share this post Link to post Share on other sites
AMC RULES 37,134 #2 Posted May 22, 2014 Good to know. Share this post Link to post Share on other sites
stevasaurus 22,881 #3 Posted May 22, 2014 You gotta know Mike (racinfool40) is one of the best. He is fast, fair and stands by what he does. I have sent a lot of work his way and have never had a complaint...not to mention he is a very good friend of mine. Share this post Link to post Share on other sites
squonk 41,413 #4 Posted May 22, 2014 Sounds like there is an "Underground Unidrive Repair Network" in the Midwest! 3 Share this post Link to post Share on other sites
mrc 841 #5 Posted May 22, 2014 hello men, i know i could buy a used unidrive for $50-150ish. the nice thing about doing it this way is everything is rebuilt and should last another 30-40 years!!! although it cost me a little more upfront i think long term i'm money ahead. i also hated to part out a great tractor just because the tranny needed work. best regards mike in mass. 1 Share this post Link to post Share on other sites
