Nathanielperz 150 #1 Posted March 29, 2014 Hey guys I was wondering if there was a special type of seal that is needed for the CAM on a hydrostatic transmission? Could I get a the o ring from home depot? Or does it need a special type? I now know that the part I needed to know about yesterday is the CAM thanks to daveoman1966... Thanks in advance- Nate Share this post Link to post Share on other sites
pfrederi 17,893 #2 Posted March 29, 2014 Take your old one an match it...just make sure it is a Buna-n or Viton o ring. Share this post Link to post Share on other sites
Nathanielperz 150 #3 Posted March 29, 2014 Why does it have to be those kind are the better quality and can hold up to the pressure? Thanks Nate Share this post Link to post Share on other sites
pfrederi 17,893 #4 Posted March 29, 2014 They are a type of rubber or synthetic compound that is resistant to oil. (not a brand name sorry for the confusion) Share this post Link to post Share on other sites
Nathanielperz 150 #5 Posted March 29, 2014 Oh OK thank you Share this post Link to post Share on other sites
