catcher77 29 #1 Posted March 22, 2014 I picked up this 702 Wheel Horse Tractor last fall and I have decided to restore and keep the tractor. I will be selling the Sickle Mower that came with it. The tear down was done over the winter (did not take to many pictures of this). Began sandblasting and powder coating a couple weeks ago (pictures of this are on the way). I will also post pictures as I reassemble. Hope you enjoy. Donnie 2 Share this post Link to post Share on other sites
Desko 610 #2 Posted March 22, 2014 Look like a good foundation to start with Share this post Link to post Share on other sites
AMC RULES 37,141 #3 Posted March 22, 2014 Yeah, cool sickle attachment too. Share this post Link to post Share on other sites
catcher77 29 #4 Posted March 22, 2014 Here are few pictures when I was tearing it down. There are several rough areas. Thanks Donnie Share this post Link to post Share on other sites
catcher77 29 #5 Posted March 22, 2014 Some pictures of the sandblasted items ready for powder coat. Trying to figure out what kind of tires to put on the front and rear. Not to fond of the tires that were on it. Any suggestions would be appreciated. Thanks Share this post Link to post Share on other sites
Jake Kuhn 1,556 #6 Posted March 22, 2014 looking good so far....its pretty hard to beat the looks of ags and tri ribs on just about any wheel horse. Share this post Link to post Share on other sites
rexman72 210 #7 Posted March 23, 2014 that will keep you busy Share this post Link to post Share on other sites
catcher77 29 #8 Posted March 23, 2014 Did not have much time to spend on the project today, but I did get a couple items powder coated. If everything goes good at work this week I can possibly get the transmission put back together (if I can remember how it goes back together) by Thursday night so I can start the assembly next weekend. Should have new oil seals for the transmission tomorrow. Donnie Share this post Link to post Share on other sites
