jeremi3210 717 #1 Posted February 28, 2014 I am in need of some seals or gaskets for my hy2 pump on my 1054. I am guessing the seal for the leaver is a o ring does anyone have a part # for the input seal? Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,029 #2 Posted March 1, 2014 Here is a start Garry Share this post Link to post Share on other sites
Lane Ranger 10,943 #3 Posted March 1, 2014 (edited) I am selling the Hein-Werner pump oil seals for the pulley input shaft on Ebay. Just do a search for them on Ebay. Here is the description I post with the seal : One (1) Brand New 1/2 inch pump pulley shaft seal to replace worn or damaged pulley shaft oil /hydraulic fluid seal in your Hein-Werner hydraulic pump on your lawn and garden tractor. This seal is a metal clad on rubber seal designed to operate on rotating shafts and are specifically designed to prevent oil or grease leakage at maximum of 10 P.S.I. and temperature of 240 degree per the manufacturer. Sizes are: I.D. 1/2 x O.D. 11/16 x 3/32 high. This seal will work on the type of hydraulic pump in the photos included in this listing. The Ebay listing item number is: 181335921468 These pumps were used on Wheel Horse, International Cub Cadet (Part NO.Cub Cadet IH-347478-R91 Edited March 1, 2014 by Lane Ranger Share this post Link to post Share on other sites
daveoman1966 3,745 #4 Posted March 1, 2014 Here is a HY-2 seal on Ebay. It is item # 181335921468. 3-days left on the listing. 1 Share this post Link to post Share on other sites
